Lachlans mk1 golf project.

[mikinoz]

i've got an impact driver mate, how rounded are the corners? Give me a call if you like.

---------- Post added at 05:39 PM ---------- Previous post was at 02:36 PM ----------

thanks guys.
also dont know wether or not to keep the diesel. micks convinced me a 16v is the way to go. dont know yet.
ive got bbs rs 15x7.9 +25 comming soon.
micks interior
tunning art coilovers
a bunch of pannels to replace for the rusty bits

and ye ill get photos of my corollas tomorow.

So these BBS are 4 stud flat backed 15x7 et25

Perfect offset and ripe for re-drilling!

[GRN_VAGN]

stripped a drive shaft bolt.
anyone got tips to get it out?

Put a old 12mm socket on a extension, and bash it over the bolt (if your meaning the 6 bolts that attach driveshaft to gearbox)
Ive got a few out like this,

[mikinoz]

I think the hot tip is you should use a spline drive not a allen key to begin with

[GRN_VAGN]

I think the hot tip is you should use a spline drive not a allen key to begin with

this.....
I think ive had to remove atleast 25 of them by force

[killingwithasmile]

yeh track down a spline tool, if you've used a hex they are still salvageable. Tap the spline in with a hammer and remove bolt as normal, worked for me.

[blumtns]

ive decided to get the car painted professionally.
this will happen in the next month or so depending on how hectic my saving gets.
anyone got any ideas for paint?
im thinking midnight blue.

[Volksee77]

mate, use a set of vice grips, they come out no worries, I always use the grips to crack em then use the sockets

[hiho]

triple square or angle grinder

[GRN_VAGN]

angle grinder

This would be a worst case scenario!!!

[Bflat]

ive decided to get the car painted professionally.
this will happen in the next month or so depending on how hectic my saving gets.
anyone got any ideas for paint?
im thinking midnight blue.

Whatever you go with, make sure you consider wheel colour at the same time