Kaninchen weiß - The Chameleon

**alex g** · 01-07-2012, 07:44 AM

Ronals get my vote , besides wilwoods are a pain to fit under rs's.
I belief they do have the seals Arno.

**mikinoz** · 01-07-2012, 09:20 AM

These ones have the dust seals. Long story short MMP has no stock and ordered from Wilwood who had no stock. That was for the non dust seal models. 8 weeks later they bit the bullet and sent me these with no seals for no extra cost.

I'm waiting in getting my rotors drilled but finding the time to get them to AGFab is hard.

Arno do you have a k-jet fuel pressure gauge by chance?

**abreut** · 01-07-2012, 10:31 AM

Originally Posted by mikinoz

These ones have the dust seals. Long story short MMP has no stock and ordered from Wilwood who had no stock. That was for the non dust seal models. 8 weeks later they bit the bullet and sent me these with no seals for no extra cost.

I'm waiting in getting my rotors drilled but finding the time to get them to AGFab is hard.

Arno do you have a k-jet fuel pressure gauge by chance?

Niice, you got lucky there. When I got mine I don't think they even had the dust seal models out yet, or they were just coming out.

I have a fuel pressure gauge that will do K-Jet pressure ranges, is that what you mean? You can borrow it if you want. You just t-piece it into the pressure line, it already has the t-piece and a bit of line on it.

**mikinoz** · 24-07-2012, 08:34 AM

Originally Posted by alex g

Ronals get my vote , besides wilwoods are a pain to fit under rs's.

Well as it turns out neither the BBS or Ronals clear the calipers as a direct bolt up...

Trials continue.

Originally Posted by GoLfMan

wow that looks great!

Thanks. Everything you see is either new or retrimmed - it is like sitting in a brand new car at the moment!

The only thing left to work out is how to get the parcel shelf supports to sit correctly, there must be variations between earlier and late model bodywork or supports - so need to do some dremelling to make that work properly.

Selling the old 16v and gearbox very soon as well. Time for new beginnings!

**mikinoz** · 12-08-2012, 06:57 PM

Seems like I keep going around in circles, but every time I pull it apart it goes back together better than the time before. All the details are coming together nicely...

RHS hub has been sorted and refitted. Situation is, the stance is spot on now...

And more of the interior. Door cards were fitted up and along with some fettling on the parts that all seem to use different standards despite all stating they fit a MK1 - door hardware on as well.