Page 6 of 7 FirstFirst ... 4567 LastLast
Results 51 to 60 of 62

Thread: Beige Mk1 golf 1.8t 20v The Rebuild!

  1. #51
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter

    to update i fitted the g60 front brakes haven't tried them yet just hope they perform ok after having the wilwoods fitted
    at least now i can run without the need of a large spacer




  2. #52
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter
    so to update fitted the H&R's they ride awesome still yet to set the height exactly where i want it tho



  3. #53
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter
    To update my new wheels arrived 16" bbs rs's i had the lips and barrels changed so i could run the off sets i wanted

    Attached Thumbnails Attached Thumbnails Beige Mk1 golf 1.8t 20v The Rebuild!-2qknl1z-jpg  

  4. #54
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter
    refurbed my anti roll bar when money allows it will be upgraded



    my chrome brackets arrived



    all fitted with stainless steel outer brackets


  5. #55
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter
    I also tok the car out to check the new wheels clear etc but broke the new inner cv joint ! the shaft is to long and the cv joint cant take it

    so im having a custom shaft made up


  6. #56
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter
    Custom shaft made from scratch 20mm shorter



  7. #57
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter
    Its was time for another show Players classics at goodwood race circuit

    a few pics from the show





    i won a trophy to


  8. #58
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter
    so to update a little it was time to change a few things 1st up some more chrome

    wipers and some caps



    I needed to go a little lower so i had to notch the drivers side you can see the rub marks on the shaft


    so i stripped that side out



    what the chassis looked like


    i then marked out the ares and cut all the way through the chassis leg, cut metal tube to size and began welding it in



    i also welded a plate above it for extra strength


    primed it and seam sealed it


    and painted it

  9. #59
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter
    Next up was the fuel pump i was running a pump and accumilator in the boot as my lines run inside the car, this made the car smell of fuel so time to change it all

    the old pump


    i needed to change the fuel tank to a gti tank as it was running the old 1.1 tank with pick up pump in the tanks
    so i sourced a gti tank


    bought a new bosch pump this one is good to run upto 500 bhp



    out came the old tank in with the new one


    i made up a mounting bracket for the pump and another for the filter and added teflon braided hose


    no more bad fuel smells

  10. #60
    Join Date
    Aug 2013
    Location
    england
    Posts
    54
    Users Country Flag Thread Starter

    Went to another show and won the people choice car of the show





Page 6 of 7 FirstFirst ... 4567 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |