advice/how to change 5 speed clutch

[marin]

Ok, i am reasonably mechnicaly minded, i'm a fitter by trade, but have never changed a clutch, we have a sachs clutch kit here, any advice, tips etc?

The car is a 1990 golf cabriolet 1.8 5 speed

found this site http://www.vintagewatercooleds.com/t...tch/clutch.htm but any extra info/hints/tips would be good

marin

[h100vw]

M8 spline drive to undo the drive-shafts from the CVs. once everything is undone, you need to rotate the back of the gearbox up so that the right hand drive cup will fit through the gap on the back of the block.

A trolley jack under the sump to drop the engine works good too.

Gavin

[Jmac]

You need special tool to line up the clutch, which you could get from a good tool supplier. Or even better if a VW Mech can lend you it. The clutch is back to front mate with the fly wheel first covering the clutch plate and pressure plate. The special tool is a plastic plate around the size of a small saucer. You will need a M9 multi hex socket 3/8 drive for the pressur plate bolts and most importantly there is a couple of dowel on the flywheel that must go back in the right spot( VERY IMPORTANT) Mate feel free to Pm and you can have the run down mate.
Really not a bad clutch to do.
Jimmymac

[86gti]

You need special tool to line up the clutch, which you could get from a good tool supplier. Or even better if a VW Mech can lend you it. The clutch is back to front mate with the fly wheel first covering the clutch plate and pressure plate. The special tool is a plastic plate around the size of a small saucer. You will need a M9 multi hex socket 3/8 drive for the pressur plate bolts and most importantly there is a couple of dowel on the flywheel that must go back in the right spot( VERY IMPORTANT) Mate feel free to Pm and you can have the run down mate.
Really not a bad clutch to do.
Jimmymac

hehe, always lined it up by eye, involves stuffing your head ip in where the gearbox sits......dont drink too much before you attempt that tho! lol.
got it in first time every time.
...but lining it up with an aligner means you know for shure!!

[marin]

Thanks for that, our kit came with the plastic cup aligning tool thingy, which seems to be a good thing to have from what i have read and what people are saying. Gona attack it on boxing day, that way don't have to worry about having it ready to drive around on chrissy day if anything doesn't go right lol so keep an eye on here on box day for incase it all falls in a heap! (hopefully not)

marin

[Jmac]

Benny you are a crazy horse i drink too much so that method is out for me hehehehe good onya mate, but hey you know what i mean about the dowels? ive seen a couple of sad things happen because they were misaligned.
Like i said Marin go for it with the PM i will have my mobile on me 0423965341 if you get in the brown on boxing day mate. Feel free.
By the way thats great that they supplied the aligner a big plus. What make is the clutch and who supplies it??? back in the day you needed the tool but if they have the heads screwed on now it great man.
Jimmymac