78 2-Door Build Thread

[dubmc]

snap-on torque wrenches...

[dubmc]

next project in progress. purchased these off dub toffee (ben) the other day, awfully good nick for the coin.




going to heat wrap them and then get a new exhaust all the way through...new gaskets and nuts on order as well.

this should tie me over until the new year when i get some semi slicks and build my 2L bottom end.

---------- Post added 17-11-2011 at 03:54 PM ---------- Previous post was 10-11-2011 at 07:49 PM ----------

picked up the car, got the headers installed today into a new exhaust 2 1/4 inch. i can definately tell a difference in the way car picks up and pulls, particularly in 2nd and 3rd, very happy with it.

will take some pics tomorrow as it is pooring in sydney at the moment. anybody who has had work done by brad at westside mufflers will know of the quality of work they produce out there.

[gldgti]

cool

where did you get the flywheel done? last time I looked around nobody wanted to know about it because they all said it looked too difficult (lazy more like).

[alex g]

Great you got it sorted bro. Would love to see the finished product.

[dubmc]

so i took a few quick picks on the new headers/exhaust whilst checking a few things under the car today.

also took a pic of the catch can set up i did, still not 100% sold on how i did it, but will leave it as is until i can think of some other options...

i also got the bolster on the passenger side re-done, not sure how many of you would remember but it had a tear in it.

i will heat wrap the extractors when i drop the engine, hopefully before new year. i have a 2l with forged pistons, crank and balance which was built by my cousin a while back.

as for the flywheel, any place that machines brakes will do the flywheel, here in syd anyway...i just took in to a clutch and brake place, cost $60.

so anway, that's the latest updates here. cheers.

[dubmc]

so here's something which doesn't happen very often?...coming home and went by another local mk1 which lives in the area, never seen it move until today when the owner was getting in it (forum member? white 2 door swallow tail bbs')...went past and gave it a bit of blaht as a razz...

owner then caught me at the lights and gave it the beans, i have been told it is a 20v turbo? but it was bloody quick and sounded awsome...due to traffic i didnt really get to have a tassle with him, probably safer option...so ripped a skid instead ha ha...that's my story bro...dope couple of minutes nonetheless ahah!

[mikinoz]

What is the rear muffler on that? Generic or something more special?

[GeorgeMK1]

Awesome work !! Exhaust looks great, and im sure it sounds great too

I love the diy on your car dude !

[dom123]

yeh mick he lives right after the roundabout where lyons road begins (Before you hit the bay) always seen him up working on it in his driveway. I got out n looked at it one day has a massive zorst i was thinking 20v turbo also. Funnier thing is when i looked at it close up the bbs rs dont have bolts on the lips how the hell are they being held together?

so here's something which doesn't happen very often?...coming home and went by another local mk1 which lives in the area, never seen it move until today when the owner was getting in it (forum member? white 2 door swallow tail bbs')...went past and gave it a bit of blaht as a razz...

owner then caught me at the lights and gave it the beans, i have been told it is a 20v turbo? but it was bloody quick and sounded awsome...due to traffic i didnt really get to have a tassle with him, probably safer option...so ripped a skid instead ha ha...that's my story bro...dope couple of minutes nonetheless ahah!

[dubmc]

What is the rear muffler on that? Generic or something more special?

faily generic mick, i asked for the closest design to a straight-through but still street legal if that makes sense? besdies that just a stainless tip so it should't rust for a while ha!