Why you Cannot do a "Wheel Alignment" on the 6R polo

[route]

sorry to hear that.... was this at vw workshop or alignment shops outside ??

Did you trying aligning the subframe ?

Yes tried. My camber settings are almost equal with no movement left in the subframe. I have half a degree more caster on the left which is not helping with the drift left on cambered roads. I have also changed all 4 new tyres but the drifting left stays.

Whiteline W53189 Control arm - lower inner rear bushing (caster correction)

I have this on my car. Didn't help.

[Umai Naa!!]

Disregard.

[Umai Naa!!]

Have you checked the alignment of the rear beam axle? What were all 4 tyres wearing like?

[brad]

Have you checked the alignment of the rear beam axle? What were all 4 tyres wearing like?

My thoughts exactly.

It would help if he didn't have a smart-arse location of "Earth". Might be able to point him to a decent shop.

[route]

My thoughts exactly.

It would help if he didn't have a smart-arse location of "Earth". Might be able to point him to a decent shop.

Thanks Brad, I'm not based in Australia.

The rear alignment is in spec. Camber reads - 1.31 left, - 1.34 right. There's alot more toe in at the rear thou, left 0.15, right 0.17