What have you done with your Polo so far (and today)

[TorqueSteer]

Badges have arrived !! )

[GTI JOE]

Looks like a cow mated with a 458.....

or the 458 skinned it going through it

Today I tried Dodo Juice Diamond White as a trial instead of my regular Nanolex stuff. I actually like it better, a little more elbow grease involved but I think worth it and cheaper. The overall shine is a little less plastic than the Nanolex and slightly deeper, I know, it's a white car, but still very impressed. Nanolex about 9 months repeat, Dodo about 4 months but the container will do your waxing for years.

If anyone is going to ask, yes, I washed, dried, clayed, paint cleaner and waxed in that order.

[ATYPIC]

Can someone with a GTI please help me out with some measurements for the rear GTI badge. I'm putting it back on and need to get the positioning absolutely correct.
1. Vertical distance from rear window down to top of the 3 letters.
2. Total horizontal width of all 3 letters (so imagine a rectangle around the entire badge)
3. Draw an imaginary vertical line from between 2 exhaust tips, upwards to where the badge would be positioned and tell me how much is the badge 'offset from centre' of that line.

Cheers guys.

Brad

[danielv10]

or the 458 skinned it going through it

Today I tried Dodo Juice Diamond White as a trial instead of my regular Nanolex stuff. I actually like it better, a little more elbow grease involved but I think worth it and cheaper. The overall shine is a little less plastic than the Nanolex and slightly deeper, I know, it's a white car, but still very impressed. Nanolex about 9 months repeat, Dodo about 4 months but the container will do your waxing for years.

If anyone is going to ask, yes, I washed, dried, clayed, paint cleaner and waxed in that order.

Perfect! I was just starting to shop around for a replacement for the duragloss sealant and was tossing up over nanolex or dodo diamond white.
What paint cleaner did you use? dodo lime prime?

[danielv10]

Badges have arrived !! )

Nice. Can't wait to see the finished results Steve

[GTI JOE]

Perfect! I was just starting to shop around for a replacement for the duragloss sealant and was tossing up over nanolex or dodo diamond white.
What paint cleaner did you use? dodo lime prime?

Used Dodo Supernatural Micro Prime, which has finer abrasives than the Lime Prime.

[shauno]

Washed the Polo for the first time - snow foam is fun opticoat made it pretty easy to clean too

Finished up with speed detailer, that stuff is awesome!

Also, washing 2 cars takes bl**dy ages

[GTI JOE]

Can someone with a GTI please help me out with some measurements for the rear GTI badge. I'm putting it back on and need to get the positioning absolutely correct.
1. Vertical distance from rear window down to top of the 3 letters.
2. Total horizontal width of all 3 letters (so imagine a rectangle around the entire badge)
3. Draw an imaginary vertical line from between 2 exhaust tips, upwards to where the badge would be positioned and tell me how much is the badge 'offset from centre' of that line.

Cheers guys.

Brad

1. 250mm from bottom of rear window
2. 95mm
3. 30mm to the right of the centre line

Cheers
Mario

[TorqueSteer]

Nice. Can't wait to see the finished results Steve

Thanks man .
Well I did the badges today there onn!
I just took a photo now it's not the best. Off my galaxy S3

It's a teaser for now

[alexaescht]

Here's my job for tomorrow...





And that car was blue once!