What have you done with your Polo so far (and today)

[iigx]

hot damn nicholas_egan - that would be a dream to drive now in the windy roads of tassie

I had to look twice at the rear lip - it looks awesome on the black!

[readerr0r]

Ran into these while checking out the Polos on Motor-Talk



More here
Jimg-2428 : Volkswagen Polo V (6R) 1.2 TSI von peppar : Fahrzeuge : #204129486
Kimg-2413 : Volkswagen Polo V (6R) 1.2 TSI von peppar : Fahrzeuge : #204129501
VW Polo V (6R) 1.2 TSI #74173

They seem to be from here, but they're not in their store... EDIT: My bad, the VW Emblem came from there. I guess the interior is a VW item
RB Styling - Oberflächenveredelung

[gavs]

Thankyou to the 6R Jedi that is Gavs. You're a hero, a saviour and a shining light...=D

Mods: 35/55 H&R's, Sway Bar, Footwell lights (Red), & Tintacar Octane. (Oh, and a pretentious 'R' badge)
New springs make the car a little more bouncy, but around corners? Sticks like glue, flat as buggery...
The steering has been firmed up too - you can feel where the wheels are now.

Keep blowing that smoke man, it feels good! Seriously, glad to help. Now you just have to try out that run up to cradle mountain from devenport, awesome road. Watch out for the typical tassie road quality with those new springs though!

[Hail22]

Can't believe i'm asking this!...

I would like to get springs for my Polo....Yes I said in the past I refused to join the spring changers club...however my car is too high!

So first of all, which springs should I get? (brand) and what size? (don't want to be tubbed on the ground but something that suits an OEM finish).

Regards

[Gusman]

Massive backflip (lol)! Yes, the jacked-up rear-end look wears a bit thin after a while. You can't go wrong with H & R 25/40 springs (although they might be 20/35's now?). $240 landed from Orange tuning back in October. The ride height is just right and I haven't had any clearance issues to date. I don't think I'd go to 35/55 though, the 25/40's are firm enough IMO.

[Hail22]

Massive backflip (lol)! Yes, the jacked-up rear-end look wears a bit thin after a while. You can't go wrong with H & R 25/40 springs (although they might be 20/35's now?). $240 landed from Orange tuning back in October. The ride height is just right and I haven't had any clearance issues to date. I don't think I'd go to 35/55 though, the 25/40's are firm enough IMO.

Edit: Does anyone know which springs i should be going for TSI here, there is the:

http://www.orange-tuning.de/shop/pol...m-p-17794.html 929kg?

or

http://www.orange-tuning.de/shop/pol...m-p-17795.html 930 kg?

Also should i get new dampers, where do i find those?

Cheers

[PoloDave]

Ran into these while checking out the Polos on Motor-Talk



More here
Jimg-2428 : Volkswagen Polo V (6R) 1.2 TSI von peppar : Fahrzeuge : #204129486
Kimg-2413 : Volkswagen Polo V (6R) 1.2 TSI von peppar : Fahrzeuge : #204129501
VW Polo V (6R) 1.2 TSI #74173

They seem to be from here, but they're not in their store... EDIT: My bad, the VW Emblem came from there. I guess the interior is a VW item
RB Styling - Oberflächenveredelung

Must ...... have..... THIS!! dont care how much it costs, if you find out more about this please let me know

[gavs]

Hail, to keep a decent rim-to-guard relationship, I'd personally go the 25/35 (yes, H&R did revise it) in either H&R or Eibach. My preference though is KW.

[Hail22]

Should i get new dampers with the springs? Unfortunately i think there is the 25/40 available now.

the 930kg spring is for diesel right?

[readerr0r]

Must ...... have..... THIS!! dont care how much it costs, if you find out more about this please let me know

From what I have found, they are standard with the German Polo Highline. The Website describes them as 'Inlays in "Pepper Grey Metallic" for center console' (Link). You might be able to get it shipped from that German Dealership that a lot of people on these forums get their items from (I don't know who, but they are mentioned in this thread somewhere, around about the time I posted those Black rear headlights). Seeing as they're standard on the car they should be able to find the part number.


PS, dont forget the trim on the door trim would need a RHD version due to the mirror adjuster.