What have you done with your Polo so far (and today)

**DAL344** · 14-02-2016, 12:23 AM

Forgot to mention I also had this installed....
RaceChip ReponseControl
No more doey throttle response

**LukePolo** · 23-02-2016, 09:46 AM

Decided to release my inner 17 year old and put in a "Clarion Bass Pack"

What have you done with your Polo so far (and today)-img_0218-jpg

Fresh from Autobarn

What have you done with your Polo so far (and today)-img_0219-jpg

First was to work out where the power cord was going to go, up over the wheelarch and through a little grommit inside the door cavity was my best option!

What have you done with your Polo so far (and today)-img_0220-jpg

Pulling out the innards of the door cavity to expose the grommit which meets inside the passenger side floorwell

What have you done with your Polo so far (and today)-img_0221-jpg

Inside the wheel arch facing the passenger door (don't even ask how I got it to go back in when I was done......)

What have you done with your Polo so far (and today)-img_0225-jpg

Feeding the power cable up over the wheel arch and up behind the headlight in the engine bay with a coathanger, which is conveniently next to the battery

What have you done with your Polo so far (and today)-img_0224-jpg

Power cable up behind the battery

What have you done with your Polo so far (and today)-img_0226-jpg

Feeding the power cable inside the door cavity behind the wheel arch into the grommit

What have you done with your Polo so far (and today)-img_0227-jpg

Behind the carpet and the side foot guard on the passenger footwell

What have you done with your Polo so far (and today)-8-jpg

Shining a light behind the back of the steering column to work out where to feed the RCA cables through

I ran the RCA cables down the opposite side of the car to ensure I don't get any unwanted interference

What have you done with your Polo so far (and today)-9-jpg

Feeding them through with a long coat hanger and alot of swearing and contorsionism.

What have you done with your Polo so far (and today)-10-jpg

Put it all back together and bob's your uncle.

**Masta_P** · 27-02-2016, 05:57 AM

had this photoshopped

Sent from my iPad using Tapatalk

**subsonic** · 27-02-2016, 07:23 AM

I really like the black and red theme could you do and white and red theme?

**Masta_P** · 29-02-2016, 06:51 AM

Originally Posted by subsonic

I really like the black and red theme could you do and white and red theme?

Thanks... I didn't do it, this guy on Insta did it for me

Sent from my iPad using Tapatalk

**danielv10** · 02-03-2016, 06:17 PM

Just removed the sound actuator. Happy with lowering the fake engine noise as I'm getting too old for the vroom vroom

Together with the mid-muffler delete, it works really well. Quiet when cruising, and get the farts and burble when stepping down.

**spare** · 03-03-2016, 10:50 PM

I always wanted to do the sound actuator thing.

Too late now, full exhaust installed. :p

**FinForce_01** · 28-04-2016, 07:44 AM

Originally Posted by himynameisbryce

Spoke to the local APR dealer in Brisbane today and was quoted $1795 for stage 1.

Since HP have been taken out of the loop the cost should now just be whatever the conversion rate of the day has it at.

It's around $1115 USD - I paid $1469 two weeks ago from a registered APR dealer in Adelaide.

**spare** · 28-04-2016, 08:32 PM

I haven't posted in this section since around the late 80's.

- De-wiper kit on the rear.
- Flow-Design lip on the front.
- Not sure if HP APR Intercooler, Intake and exhaust pics were posted last time, so through some old ones of each of them in for good measure.

I'll get some new pics after the next wash now that lip is on.

Took it to the drags and ran a new best of 13.5
Can prob scrape a bit off, as my launch is OK (I think) but I haven't quite nailed the optimum shift times towards the end.