Polo tsi --> gti spring install

[Sydneykid]

Update, got a call from the mechanic saying the GTI springs sit exactly the same height as the other springs so there was an unnoticeable difference. I'm going on to aftermarket springs now to achieve a balanced look.

Even with used springs there will be a settling in period, I'd hang off until you have run a couple of tanks of fuel through it and/or had a few passengers/load in it. Then measure it.


Cheers
Gary

[jsoto2005]

Even with used springs there will be a settling in period, I'd hang off until you have run a couple of tanks of fuel through it and/or had a few passengers/load in it. Then measure it.


Cheers
Gary

You're right, a few stagnant days wasn't really enough. Ill take this advice.

[amazeer]

I'm confused, the opening post doesn't have any instructions to follow with wiring or installation or product choice, nor is there any links till the 4th post of the thread, but even then that is for a rev cam that mounts into the number plate light not the "funky pop out camera" like you mentioned.
I also want the original look, but if this is the way you went with it then im probably chasing something different

Sorry. I put up the wrong link. Golf pop out badge RVC into Polo 6R