Support VWWC

Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42

Thread: Polo ride height & wheel fitment thread

  1. #1
    Join Date
    Aug 2012
    Location
    Albury, NSW, Australia
    Posts
    561
    Users Country Flag

    Polo ride height & wheel fitment thread

    Not trying to start a battle like the golf and 9n3 lot, but just curious to know how low other polos are and what wheels your currently rocking.

    coil-overs or just springs, oem+, im interested in all.

    And if not lowered, you can still add your wheel specs. This way new comers can see what widths/ offsets work on the polo.

    Key points i think would be:
    What components you have
    The ride height drop (or range for coils)
    Wheel/Tyre size (encase of over or under size)
    Ground to arch height Front/Rear

    alternatively, follow a similar layout from the mkiv thread:
    Front: wheels/tyre size
    Rear: wheel/tyre size
    Arch height to ground Front:
    Arch height to ground Rear:
    Photo 1: showing height of car
    Photo 2: showing poke/fitment in relation to the guards
    (photos not necessary, just to show others how it all looks)



    TSI with Sports pack
    Setup: springs, 15mm drop
    Ronal Boavista
    Front: 17x7 et46 215/40/17
    Rear: 17x7 et46 215/40/17
    Arch height to ground Front: 630mm
    Arch height to ground Rear: 672mm
    (note; these heights may be wrong, was working backwards around my coil-over install and change of wheels, please pm me if you know the actual height)
    Last edited by MrDeathLad; 01-07-2013 at 06:20 PM.

  2. #2
    Join Date
    Aug 2012
    Location
    Albury, NSW, Australia
    Posts
    561
    Users Country Flag Thread Starter
    and i'll go

    Setup: coil-overs, KW V1
    Wheels: Ronal Aristo
    Front: 18x7.5 et38 215/35/18 (kumho KU39)
    Rear: 18x7.5 et28 (10mm spacer) 215/35/18 (Kumho KU39)
    Arch height to ground Front: 614mm
    Arch height to ground Rear: 625mm

    Last edited by MrDeathLad; 05-05-2013 at 06:21 PM.

  3. #3
    Join Date
    May 2008
    Location
    Sydney
    Posts
    640
    Setup: coil-overs, KW V1
    Wheels: GTI Denvers
    Front: 17x7 et46 215/40/17 (15mm spacer)
    Rear: 17x7 et46 (20mm spacer) 215/40/17
    Arch height to ground (to centre hub) Front: 597mm (317mm)
    Arch height to ground (to centre hub) Rear: 610mm (320mm)


    This is as low as I can get it with these wheels and spacers without it scrubbing out in hard cornering situations. It will still get minir scrub if hitting a big dip in the road at higher speeds (above 60k/hr).
    It is also as low as the rear coils can be wound down, there is possibly another 10-15mm if the coil adjustment is removed completely.


    Denvers:




    Aristo's (same tyre specs as mrdeathlad & no spacers)


    Last edited by BLN355; 05-05-2013 at 10:55 AM.

  4. #4
    Join Date
    Oct 2010
    Location
    Essendon, Victoria
    Posts
    869
    Users Country Flag
    Setup: H&R Sport Springs 25/40
    Wheels: Sparco Assetto Gara
    Front & Rear: 17X7.5 et35 215/40/17 (Federal 595 EVO), no spacers.
    Arch height to ground Front: 610mm
    Arch height to ground Rear: 620mm


    2011 POLO GTI 3dr, Candy White, Audio-Comfort-Xenon Packs
    MODS: H&R Sport Springs - Bilstein B12s - Whiteline Sway Bar - Milltek Cat Back Exhaust - Sparco Assetto Gara Wheels

  5. #5
    Join Date
    May 2012
    Location
    Melbourne
    Posts
    792
    Users Country Flag
    Polo GTI
    H&R 25/40
    OZ racing ulltraleggra 17x8 215/40 (stock Dunlop's)


    I would not go any lower with the 8" wheel as the front is dead level if not a 1-2mm out side and if the tyre wasn't stretch a little it would be nearly touching as is.

    I honestly thought the H&R springs would make it more firmer but I have felt no difference in that department. What I have found is that in reducing the height therefore centre of gravity combined with the stiffer spring type in regards to pitching over itself (side to side) there is less body roll. There's a long sweeping corner that I've been using to test on the way home of the highway. I come in at 110 and try to hold as much speed as possible without the car pushing wide. Without springs around 75, with springs over 80kmh can be held without it pushing.
    I've also changed my wheels (not rubber) to the tune of 6-7 kg off a corner which may aid this a little.

    Apologies for the crap picture. I've had my DSLR fixed and when I get the car back (2 weeks at the dealer now) will be out to take more.
    Last edited by LunchboxVRS; 05-05-2013 at 07:30 PM.
    MY16 Candy white Octavia VRS Wagon, sunroof, 19" black pack, tech pack, comfort pack, auto tail gate
    MY12.5 Polo 6R GTI


  6. #6
    Join Date
    Jun 2008
    Location
    Ringwood, Victoria
    Posts
    4,140

    polo ride height

    Great thread MrDeathLad! Please people, keep this without comment, just specs for people's reference. If I see any comments, to save from things getting out if hand I will just delete them.

    Stickied too

    Stage 2+ Intercooler Carbon Intake Downpipe Swaybar DV+ Remsa.

  7. #7
    Join Date
    Nov 2010
    Location
    Sydney
    Posts
    350
    Users Country Flag
    Setup: H&R Sport Springs 25/40
    Wheels: TSW Nurburgring 18x8 ET35
    Tyres: Khumo 225/35
    Arch height to ground Front: 610mm
    Arch height to ground Rear: 635mm


    Last edited by bigfoot; 22-10-2013 at 07:18 AM.
    MY18 Golf 7.5R - Ecotune Stage 1
    Mazda RX2 - 13B Bridgeport GTX4202R

  8. #8
    Join Date
    Apr 2012
    Location
    Bridgeman Downs ,Brisbane
    Posts
    340
    Users Country Flag
    Polo TSI
    Weitec Coil-overs
    TSW Mallory 5, matte black finish 17x8"
    falken RT615 205/40

    Arch to ground all round : 610mm



    best thing is no scrubbing or rubbing of any kind, even when driving spiritedly

    love it

  9. #9
    Join Date
    Oct 2011
    Location
    South Australia
    Posts
    195
    VW GTR24 or VW Motorsport Wheels as they are known.

    Standard GTI Ride Height
    17x7 ET46
    215/40 R17 Dunlop SportMAXX





    Last edited by dening; 03-06-2013 at 10:57 PM.

  10. #10
    Join Date
    Mar 2011
    Location
    Melbourne
    Posts
    601

    Setup: H&R Monotube coilovers
    Wheels: Varrstoen 17x9.0 ET35
    Tyres: Kumho KU31 215/40R17
    Arch height to ground Front: 612mm
    Arch height to ground Rear: (??)


Page 1 of 5 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |