Polo GTI 6R stock ride height?

[llai8501]

Hey guys,

Wondering what the stock ride height of the front and back of the GTI? I've been googling and can't seem to find anything.

The Weitecs are scrubbing slightly at high speed when turning or during some bad roads at speed.

Trying to figure out how much I should raise the car.

I'll measure it tomorrow and see what it is now but I'm not sure how it's measured!

Any help is much appreciated! Thanks guys!

For reference:

[car_nut]

Hey guys,

Wondering what the stock ride height of the front and back of the GTI? I've been googling and can't seem to find anything.

I measured mine last week before I fitted 18" wheels -
Stock ride height 2013 Polo
Arch height to ground Front: 635mm
Arch height to ground Rear: 668mm

I measured vertically from the ground up through the centreline of the wheel to the lip of the guard.

I find the thread -
http://www.vwwatercooled.com.au/foru...ght-85362.html
very helpful

'bigfoot' please measure and update your ride heights when you get a chance

[llai8501]

I measured mine last week before I fitted 18" wheels -
Stock ride height 2013 Polo
Arch height to ground Front: 635mm
Arch height to ground Rear: 668mm

I measured vertically from the ground up through the centreline of the wheel to the lip of the guard.

I find the thread -
http://www.vwwatercooled.com.au/foru...ght-85362.html
very helpful

'bigfoot' please measure and update your ride heights when you get a chance

Thanks I'll try!

[gavs]

Ride height according to the technical specs is 351mm+/-10mm for the front and 367mm+/-10mm for the rear.

[Lucas_R]

Your car doesn't even look very low - its probably just the offset of your wheels that's scrubbing when you hit a bump or go through a corner fast.

[llai8501]

Your car doesn't even look very low - its probably just the offset of your wheels that's scrubbing when you hit a bump or go through a corner fast.

Can you explain what this means? And as the scrubbing is light and occasional when driving hard or bumpy am I at risk of much damage?

My friend suggested raising it 5mm and seeing it it helps.

Thoughts?

[llai8501]

Ride height according to the technical specs is 351mm+/-10mm for the front and 367mm+/-10mm for the rear.

Is that measuring from the arch to the top of the tyre?

Looking online people seem to measure from the ground to the arch in line with the wheel cap.

Thoughts?

[Lucas_R]

Can you explain what this means? And as the scrubbing is light and occasional when driving hard or bumpy am I at risk of much damage?

My friend suggested raising it 5mm and seeing it it helps.

Thoughts?

Sorry - mabye i should have explained more clearly. What i meant was that its not like your car is super low/slammed or anything. So wondering why its scrubbing? Your aftermarket rims might not be the optimum offset (offset meaning how far they stick out from the hub) and this (combined possibly) with the width of tyre you are running might be your problem.

Do you know what offset your rims are? And what width tyre are you running?

[llai8501]

Sorry - mabye i should have explained more clearly. What i meant was that its not like your car is super low/slammed or anything. So wondering why its scrubbing? Your aftermarket rims might not be the optimum offset (offset meaning how far they stick out from the hub) and this (combined possibly) with the width of tyre you are running might be your problem.

Do you know what offset your rims are? And what width tyre are you running?

Thanks for the clarification!

I am on this I believe:

Tracer V1 18x7.5 5x100/114.3 42 73.1

From here:
http://streetandcircuit.biz/tenzor/c...es-tracer.html

[car_nut]

Ride height according to the technical specs is 351mm+/-10mm for the front and 367mm+/-10mm for the rear.

That would be from wheel arch to centre of wheel.

My corresponding standard wheel/tyre/suspension measurements were front 343mm (just inside spec) and back 370mm. I expect every std. Polo GTI is different.

Thanks Gavs.