Support VWWC

Results 1 to 4 of 4

Thread: How to change the bulbs on the headlights??

  1. #1
    Join Date
    Aug 2012
    Location
    sydney, NSW
    Posts
    69

    How to change the bulbs on the headlights??

    Hi guys just got some new Phil CV and was wondering how I'm meant to access the headlights so i can change them? i notice that there is a rubber piece (round circle piece) which can be removed to access the parkers but for the main lights there doesnt seem to be any room to get my hands to it. Any help would be great.

  2. #2
    Join Date
    Aug 2012
    Location
    greensborough, victoria
    Posts
    14
    Users Country Flag
    you need to take the headlights out to access it, remove the two t30 torx bits on top and the headlight should clip out.
    (it might be a bit tight)

  3. #3
    Join Date
    Dec 2011
    Location
    Melbourne, Victoria
    Posts
    154
    Users Country Flag
    That information is also in the manual. Just be aware the headlight will be firmly held in there so be careful when pulling it up and out
    2011 Polo GTi

  4. #4
    Join Date
    Jun 2008
    Location
    Ringwood, Victoria
    Posts
    4,140

    Just remove the connector first then push on the light from where the connector is.

    Stage 2+ Intercooler Carbon Intake Downpipe Swaybar DV+ Remsa.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |