So this topic has been covered in several areas on this forum, and other forums too. Thinking it'd be best to make some sort of guide for anyone willing to tackle this.

There is a guide available here: http://www.benja.it/devio_en.zip (mad props to the French Polo guys, in particular to kennygolf), and readerr0r's post: What have you done with your Polo so far (and today)

To me the guide is really great, but I fail () to understand what needs to be connected where...

The kit is very nicely packaged, but will require the following connections to be made:

Here is the main connector, with pin numbers diagramed beside: What plugs into these (steal some from the original 17-pin connector)?


Then the following two pin harness: What plugs into these?


Relays; pretty sure they can only be pushed in one way:


And the 4 wires to connect (somewhere): My understanding is pin 1 and 37 to plug into the corresponding BCM module A, but what about 6 and 43 (numbers off the wires)?


These are all the connections that are required to complete the physical side of things.

If anyone is happy to assist, (readerr0r?! ) that would be great to assist dummies such as myself!

Thanks everyone