Support VWWC

Results 1 to 3 of 3

Thread: Gone through 2 sets of top mounts/bearings!!

  1. #1
    Join Date
    Nov 2013
    Location
    United Kingdom
    Posts
    25

    Gone through 2 sets of top mounts/bearings!!

    Hi all,

    I have been suffering from a creaking/popping noise on my gti from my top mounts for a long time now. I have replaced the mounts and bearings twice now and the noise just keeps coming back.

    This time i replaced them with aftermarket ones and now the right hand just squeaks when driving and turning!!

    Does anyone know a possible solution as it is starting to get really annoying now.

    The car is on bilstein coilovers.

  2. #2
    Join Date
    Jun 2008
    Location
    Ringwood, Victoria
    Posts
    4,140
    Remove the coilovers. If you don't want to do that then raise them up closer to the factory height. Unfortunately if indeed the mounts and bearings are the problem them there is no fix.

    Pontiff had a similar issue in his 77tsi that we found was the airbox moving on its mount which when heavily lowered on its coilovers, exacerbated the problem due to the increased damping stiffness. Check this also but each car is different so just because 9 out of 10 lowered gti's don't have an issue, you might unfortunately just have that 1 car that is prone to this issue.

    Stage 2+ Intercooler Carbon Intake Downpipe Swaybar DV+ Remsa.

  3. #3
    Join Date
    Nov 2013
    Location
    United Kingdom
    Posts
    25
    Thread Starter

    Thanks gavs, i need to raise the car anyway because of fitting new alloys which poke out more so i will see if that makes it any better

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |