Hi,
Just installed a haynes and reece towbar and westfalia universal kit 321 600 300 153 in my 2016 polo. Can't get VCDS to talk to the trailer module.

Code:
Friday,28,October,2016,13:33:08:01023
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 16.8.1.1 (x64)
Data version: 20160902 DS256
www.Ross-Tech.com

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 6R (6C0)
Scan: 01 03 08 09 15 17 19 44 5F 69

VIN:   Mileage: 11480km-7133miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
44-Steering Assist -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000
69-Trailer -- Status: Cannot be reached 0100
 
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: 6C0-909-901-V1.clb
   Part No SW: 6C0 909 901     HW: 6C0 937 087 
   Component: GW MQB A0     H08 0087  
   Revision: --------    Serial number: 001578051465
   Coding: 030000046F0A560071000000000000010001010000000000000000000000
   Shop #: WSC 31414 790 50316
   ASAM Dataset: EV_GatewA0Lear 013020
   ROD: EV_GatewA0Lear_VW26.rod
   VCID: 65C0327A6462396A3B-8030

   Battery Monitoring Control Module: 
   Subsystem 1 - Part No SW: 6C0 915 181 A    HW: 6C0 915 181 A
   Component: J367-BDM  H08 0223 
   Serial number: 52344E23362821256858

1 Fault Found:
131655 - No Communication with Towing System Control Module (J345) 
          U1003 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 5
                    Mileage: 11480 km
                    Date: 2016.10.26
                    Time: 01:24:48

                    Supply voltage: Terminal 30: 11.9 V
                    Terminal 15: On
-------------------------------------------------------------------------------
Address 69: Trailer
Cannot be reached

End-------------------------(Elapsed Time: 02:17)--------------------------
I'm almost certain the can line is hooked up right its green/org and brown/org the connector in the bcm closest to the driverside door pin 46 and 47. There is ~60ohm across the two and if i leave it unplugged the instrument cluster gets no signal. I have 2 power lines active on the module. Ignition and constant.

Had anyone done a trailer module on this years model?? Do I need to do anything other than add 69 to the gateway installation list?

Thanks