Will this intercooler fit?

[clicht]

looks good....thanks.do you by any chance has measuRements.
7kw is a fair amount of gain

[kaanage]

IMO much better than the Forge/Seat/this latest etc .....

Is this from comparisons? I know the original Forge has been compared to the APR and yours looks like the APR (Treadstone TRV) design but is it as good and have you had it compared with the SEAT (or seen a comparison somewhere)?

Not being antagonistic - I just want to know.

[vwthunder]

Custom FMIC ...










45degree intake temps after 3 dyno runs ..... no pressure drop and 7kw atw gained .... less than $1000 fitted

Looks like just a cheap Ebay core to me.

But hey, if it works. There is one of those sitting in Tims workshop that Josh bought for his polo but never fitted

[GoLfMan]

Looks like just a cheap Ebay core to me.

But hey, if it works. There is one of those sitting in Tims workshop that Josh bought for his polo but never fitted

fabbed up the brackets and ready to go... now to find the money for piping

[VWindahouse]

For those in Brisbane coming to the Dyno day, have a chat to me about the FMIC I have on my car. Similar in design to the APR FMIC. Lets see the Intake temps after a few runs ..... (I have seen it before )

IMO much better than the Forge/Seat/this latest etc .....

I wouldn't be so quick to say your cooler is better than the SEAT.

Just going off real world data from a VDCS I can easily show with logs that after more than 6, 3rd gear pulls to just over redline up a steady incline back to back with just a u-turn in between the SEAT cooler did not register temps more than 30 degrees at any stage. I have the logs that I can email anyone who wants them (thanks Gav) I think you'll agree 45 degrees v's 30 is a bit of a difference even when you take ambient temps into consideration.

I guess this Saturday will confirm everything.

[Sharkie]

I wouldn't be so quick to say your cooler is better than the SEAT.

Just going off real world data from a VDCS I can easily show with logs that after more than 6, 3rd gear pulls to just over redline up a steady incline back to back with just a u-turn in between the SEAT cooler did not register temps more than 30 degrees at any stage. I have the logs that I can email anyone who wants them (thanks Gav) I think you'll agree 45 degrees v's 30 is a bit of a difference even when you take ambient temps into consideration.

I guess this Saturday will confirm everything.

I'm going off actual intake temps measured with a probe at the last Polo dyno day. APR FMIC did 44.x, mine did 45.0, other FMIC did in the 50s and stock SMIC did 70+. On a day that was summer & 32 degrees outside and even hotter in the dyno shed .... this time around we have a nice open space, winter and a massive fan helping the cooling.

I'm happy to wait and see the comparative results on Saturday.

I think we should have a Bang for your Buck category as well ..... how much $$ per kw gained (from stock) ... be a few surprises in there I think.

[VWindahouse]

Fair enough mate some good data there. My only concern is your comment

IMO much better than the Forge/Seat/this latest etc .....

When there was never a SEAT cooler there at all for you to form an opinion over.

I just though I would bring attention to this so the guys who are trying their best to organise a group buy in this thread are not misinformed by an unjustified opinion.

[nightphotographer]

Really keen to hear the results from your dyno day now - I went forge purely because of price, would love to have stayed OEM and gone SEAT so I didn't have a random front bar lying around in my garage...but ahhh well, maybe in the future.

[Sharkie]

Fair enough mate some good data there. My only concern is your comment

IMO much better than the Forge/Seat/this latest etc .....

When there was never a SEAT cooler there at all for you to form an opinion over.

I just though I would bring attention to this so the guys who are trying their best to organise a group buy in this thread are not misinformed by an unjustified opinion.

My opinion had nothing to do with the thermal aspects of the coolers ..... its all around the flow and for me there is no way a cooler of the SEAT and Forge design will flow as well as the APR style one. For air to be performing a 180degree turn and to expect good flow characteristics just does not make sense to me.

As far as I'm concerned a straight through design works best, followed by the APR style, followed by the SEAT/Forge design a distant last. Happy for a flow bench to prove me wrong .... just not seeing it until then.

[VWindahouse]

Well if you read your comment again the thermal aspects are exactly what you were referring to. Not the design.

For those in Brisbane coming to the Dyno day, have a chat to me about the FMIC I have on my car. Similar in design to the APR FMIC. Lets see the Intake temps after a few runs ..... (I have seen it before )

IMO much better than the Forge/Seat/this latest etc .....

And for this comment

its all around the flow and for me there is no way a cooler of the SEAT and Forge design will flow as well as the APR style one. For air to be performing a 180degree turn and to expect good flow characteristics just does not make sense to me.

I don't understand what your trying to say to be honest, all the cores are a 180 degree design??? None are a straight through version.