What did you do to your Polo today?

[572]

Got dyno'ed for the first time today...Not that impressed with it, but 37C ambient temp and 100C intake temp gave me a reading of 115KW ATW...

Sounds about right given the conditions - as a comparison I got 120kw ATW with around 70deg intake temp.

[Servo]

Sounds about right given the conditions - as a comparison I got 120kw ATW with around 70deg intake temp.

Is that with an FMIC?

[ef9]

Is that with an FMIC?

Tagging on to this question;

Jon, is that with down pipe also?

[572]

Is that with an FMIC?

Tagging on to this question;

Jon, is that with down pipe also?

Negative on both - tune only.

I'd want to be seeing mid 130's if I had both of those!

[ef9]

Negative on both - tune only.

I'd want to be seeing mid 130's if I had both of those!

yeh, that's what i'd be aimming at too.
my next mod should be bilstein b8 and APR downpipe/high flow cat.

[Giallorosso]

Gave the inside a good clean, and then cleaned and conditioned my leather seats with Lexol and then Zaino Z10. Feel like new again.

[Servo]

Gave the inside a good clean, and then cleaned and conditioned my leather seats with Lexol and then Zaino Z10. Feel like new again.

I did the same thing today too. Used 303 on the trims and Duragloss leather shampoo and conditioner.

[tooch]

I did the same thing today too. Used 303 on the trims and Duragloss leather shampoo and conditioner.

I love 303. Soaked my door seals in it today, no more squeaks

[vwthunder]

I love 303. Soaked my door seals in it today, no more squeaks

WHat is this 303 your using, I tried to work out what product it is on http://www.carcareproducts.com.au

I have some squeaking from my doors, thought it was the door trim, could it be the rubber door seal

[tooch]

WHat is this 303 your using, I tried to work out what product it is on http://www.carcareproducts.com.au

I have some squeaking from my doors, thought it was the door trim, could it be the rubber door seal

This stuff here http://www.carcareproducts.com.au/pr...ace_protectant

Basically use it where most people would use Armor All. It's great for all your interior plastics, unpainted external plastics and rubber. Leaves a nice sheen without being glossy and oily, and protects the plastic very well.

Load up a cloth and give the door seals a good wipe over several times, will help stop the creaks for a while if that's what's causing yours.