What did you do to your Polo today?

[sambb]

is that a little MBC I cans see in the engine bay pic? How are you running yours?

[HAR80N]

is that a little MBC I cans see in the engine bay pic? How are you running yours?

sure is mate have it set up from the boost pipe in to the mbc then in to the n75 i got it set to 0 just slows the air down to the n75 valve and makes boost come on alittle faster and holds alot smoother with out it my car would surge like crazy and boost spike over 20psi then drop down to 10 psi now with it on it boosts to 17psi and holds it smooth

[h100vw]

Don't let Guy hear you complain about that spike

[rgvlee]

It surprises me that people have these issues?
I have had 0 dramas with my custom code tune.

[HAR80N]

It surprises me that people have these issues?
I have had 0 dramas with my custom code tune.

yeh happen to me since day 1 adding a dump pipe made it worse lol spike to 25psi haha was super fun

[louis19]

It surprises me that people have these issues?
I have had 0 dramas with my custom code tune.

+1, and thats why you go with custom code IMO. My phase 2 tune was flawless while I had it.

[HAR80N]

+1, and thats why you go with custom code IMO. My phase 2 tune was flawless while I had it.

yeh i didnt think much when i first got my car and apr is only 30 seconds from my work so i got there tune if i knew what i did know i would of went custom code hahaha

[TDIfan]

Noticed the PoD got a very loud air leaking noise on the highway the other day
It just appeared out of nowhere and after some testing it seems to be boost related


After looking from under I found this

Looks like the driveshaft is rubbing against the silicon turbo hose
Took it out to have a good look and looks like it been through some serious rubbing



Plus there was already a not very loud air leak since I took the pipework apart to solve some chafing issues on the MAP sensor
So I end up buying the pipework kit from the Darkside guys
Took only 4 days including weekend to arrive from the UK that was quick!



Will have to wait for the weather to cool down a bit before I get my hands dirty
Report back soon

[sambb]

Installed the back two of Eddy's eccentric bolts for the subframe. First one went in with a slight ream, no worries 45 mins done. I'll get all four done today no worries I thought. Driver side - not so much. Best part of three hours to get it reamed all the way through and the subframe undone all round so I could get the bolt lined up. The worst case of right leg sunburn going and lucky to make kids pickup in time! but happy they are in. Two to go and then a proper alignment.

[SuperChimps]

Yesterday, with Gavin's help (i.e. he did most of the work!), installed new poly bushes front and rear on my lower control arms.. Along with 4 new tyres from the other day, the car is driving beautifully. Very happy with the result!