Tramlining & Excessive Torque Steer.

**noone** · 31-07-2009, 01:17 PM

Want to swap? You can do it all again!!!

Thats a healthy list of mods, guess I won't be getting my camber any time soon

**insanekiwi** · 31-07-2009, 01:43 PM

I will be keen, just keep us up todate.

Your engineer chap should make it, or you should make it available for online sale. I mean market is huge!

Originally Posted by Eddy

Hoyhoy.
OK people, we have talked a little bit along these lines. Will get back to ya's.
Its not just the camber pins, you need longer bolts (hard ones), 30mm slim line open ender which will have to be made as well. Also a 30mm socket for ajusting.
Rough figures will be around 140 - 170 dollars with longer bolts & the spanner including GST, no socket, plus fitting which can be straight forward, but may need to ream the holes out if damaged.
This price might scare a few off, hey, but its cheap for what it does.
This engineer chap is from the old school, not on line & hard to get to answer the Ph. So I'm not sure on how to go about it as yet.
How about I edit the opening post for those interested or start a new thread for a list of possiables,,,,, what ya's think.

**seangti** · 31-07-2009, 01:59 PM

Eddy, QR sprints in September, would be tops to see the car in full flight. Would also be nice to compare a heavily modded one to a stocker, and also learn some new tricks.

**Desmo** · 31-07-2009, 02:27 PM

Just curious has anyone tried the Kmac camber plates, i was looking at trying these..

PN:#141516J $370 - pair

**Eddy** · 31-07-2009, 08:22 PM

Hoyhoy.

Please take note to post No2, me started a list of those interested at the rough price suggested in a later post, but will confirm before hand.

**Desmo** · 31-07-2009, 09:02 PM

Ok im interested.

**Preen59** · 31-07-2009, 09:33 PM

I could do them for $155...

Just kidding.

Fair price. I should have said something earlier. Could of got in on a good deal here!

If it all falls over with your mate, let me know. I'd be interested in making them. However if all goes ahead, that's cool too. I'm not interested in undercutting anyone.