Rear end sway bar for polo

[Roodosutaa]

Finally installed the RSB last night and the difference is very noticeable - same corners the front seems to bite harder and I must have carried more speed into the corners as there were more tyre chirps from the front and I've noticed the ESP light flickering more often.

Is overtightening the U-bolts (still by hand) going to be an issue? The bushes look a bit squashed.

Greasing every 3amonths is going to be a pain in the proverbial though if it means putting the car up on a ramp and undoing the clamps....

[Whubbsie]

Any REPCO dealer I dare say. I got mine through Repco for $200. They just order it in.

yeah I know I can order it was hoping to walk in and buy off the shelf... no matter will just have to order it.

[DaveMack]

Greasing every 3amonths is going to be a pain in the proverbial though if it means putting the car up on a ramp and undoing the clamps....

Really only need to grease them when they start to make noise (could be 6-months or more).

Dave

[Jmac]

Really only need to grease them when they start to make noise (could be 6-months or more).

Dave

Yeah Dave i might have been a bit on the anal side there, but last 2 ive looked at have been bone dry and sounded like an old bed spring , so like you say Dave hear that bed spring noise that is time. I was just suggesting some preventative maintenance, so i agree with your 6 months mate
CHeers
Jmac

[Roodosutaa]

I got mine through AutoONe for $225