Results 1 to 8 of 8

Thread: Polo tdi with 125k kms, what's likely stuffed?

  1. #1
    Join Date
    Apr 2006
    Location
    Melbourne, Victoria
    Posts
    402

    Polo tdi with 125k kms, what's likely stuffed?

    Hi guys, my wife's 2009 polo tdi has just ticked over 125000kms. It has some creaks in the suspension, what is likely to need replacing?
    Beige 79 Mk1 GLD White 76 Mk1 LS 3 door
    White 68 Alfa 1750 Berlina Champagne 91 Alfa 75
    Red 09 9N3 Polo TDI White 2010 Skoda Octavia Combi TDI

  2. #2
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,984
    Users Country Flag
    LCA bushes, I bet the tyres aren't worn even either. Replace with Cupra ones or poly for a permanent fix.

    Gavin

  3. #3
    Join Date
    Apr 2006
    Location
    Melbourne, Victoria
    Posts
    402
    Thread Starter
    Thanks Gavin, any idea where I can source these?

  4. #4
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,984
    Users Country Flag
    Quote Originally Posted by hiho View Post
    Thanks Gavin, any idea where I can source these?
    jmac will have the Cupra ones, otherwise online for the poly ones from superpro or have a look at psituning through the link in my signature.

    Gavin

  5. #5
    Join Date
    May 2008
    Location
    melbourne
    Posts
    2,080
    i've got some lower control arm front bushes - the seat cupra ones that i never had fitted to my polo because the thing was written off by a landcruiser.

    i see you're in melbourne, too. if i can find em within a couple of days, i'll pm you. i've also got brake stuff (pads, rotors) that are brand new in box. i'm happy to let them go for cheap (like, fcking cheap).

  6. #6
    Join Date
    Apr 2006
    Location
    Melbourne, Victoria
    Posts
    402
    Thread Starter
    Thanks guys, I ordered lca and swaybar bushes from psi. They arrived yesterday and were a breeze to install. Made a HUGE difference! The old bushes were were wobbly like jelly....

  7. #7
    Join Date
    Apr 2006
    Location
    Melbourne, Victoria
    Posts
    402
    Thread Starter
    So there is still an annoying clunking that occurs when more than about a quarter turn of steering lock is applied in either direction, usually in conjunction with a rough surface. It does not sound/feel like cv joints. Any suggestions? Ball joints or strut tops perhaps???
    Beige 79 Mk1 GLD White 76 Mk1 LS 3 door
    White 68 Alfa 1750 Berlina Champagne 91 Alfa 75
    Red 09 9N3 Polo TDI White 2010 Skoda Octavia Combi TDI

  8. #8
    Join Date
    Oct 2010
    Location
    Melbourne, VIC
    Posts
    3,178
    Users Country Flag

    It could be what some of us are experiencing in this thread Suspension Knock / Rattle Turning at low speed
    If it is, then good luck
    Resident grumpy old fart
    VW - Metallic Paint, Radial Tyres, Laminated Windscreen, Electric Windows, VW Alloy Wheels, Variable Geometry Exhaust Driven Supercharger, Direct Unit Fuel Injection, Adiabatic Ignition, MacPherson Struts front, Torsion Beam rear, Coil Springs, Hydraulic Dampers, Front Anti-Roll Bar, Disc Brakes, Bosch ECU, ABS

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |