Polo GTI with MK1 Audi TT Brakes

**xc17ed** · 12-01-2011, 03:33 PM

I've done some searching and can't really find a definitive answer...

I've sourced a set of front MK1 Audi TT brakes complete - rotor, caliper, pads, etc. I want to use these to replace my 06 Polo GTI brakes, can anyone confirm that these are a direct bolt on?

Thanks

**kmli5** · 12-01-2011, 03:42 PM

yes, as long as you also have the TT brake carriers as well.

The polo gti brake hose might be a little bit to short for the TT caliper, I am not 100% sure.

cheers

**xc17ed** · 12-01-2011, 03:51 PM

Thanks for that, I'll make sure I get the carriers as well.

**Jmac** · 12-01-2011, 08:13 PM

Yeah if you do it get the lot, same goes for the rear, ive done a few fronts and a set of rears.
Cheers
Jmac

**Jmac** · 12-01-2011, 08:14 PM

Yeah if you do it get the lot, same goes for the rear, ive done a few fronts and a set of rears.
Cheers
Jmac

**vwthunder** · 12-01-2011, 08:33 PM

Originally Posted by Jmac

Yeah if you do it get the lot, same goes for the rear, ive done a few fronts and a set of rears.
Cheers
Jmac

Do you know what the rears were Jmac, do they have to be of a 225 or any TT, do you know if there is differences between TT180 TT225 TT3.2

**kmli5** · 13-01-2011, 12:42 AM

Originally Posted by vwthunder

Do you know what the rears were Jmac, do they have to be of a 225 or any TT, do you know if there is differences between TT180 TT225 TT3.2

the rear from a TT225 is what you want, because TT180 uses the same 232mmx9mm solid disc as the polo gti.

With the 225, it is bolt on plus splash guard if you get it from a FWD. Otherwise with quattro 225, you will need 6mm spacers.

**vwthunder** · 13-01-2011, 06:59 AM

Originally Posted by kmli5

the rear from a TT225 is what you want, because TT180 uses the same 232mmx9mm solid disc as the polo gti.

With the 225, it is bolt on plus splash guard if you get it from a FWD. Otherwise with quattro 225, you will need 6mm spacers.

Thanks, guessing it is not easy to come by