Support VWWC

Results 1 to 4 of 4

Thread: Polo GTI Dogbone Mount Torque Settings

  1. #1
    Join Date
    Jan 2020
    Location
    Sydney, NSW
    Posts
    3
    Users Country Flag

    Polo GTI Dogbone Mount Torque Settings

    Hey all,

    In the process of installing a new powerflex dogbone insert for my 9n3 GTI.

    Was just wondering what are the torque specs for the mount.

    e.g. the 2 bolts to the transmission and the main insert bolt to the subframe.

    Cheers, Nick.

  2. #2
    Join Date
    Oct 2017
    Location
    Wodonga, Vic
    Posts
    648
    Users Country Flag
    the manual doesn't show a torque spec, but going by the size of the bolt it should be about 70nm- I just did it up tight...

  3. #3
    Join Date
    Sep 2013
    Location
    nsw
    Posts
    3,215
    Users Country Flag
    In the ECS clutch kit it says the two into the gearbox are 50 Nm. The one into the cross member is only like 25Nm from memory because the threads are way smaller than the hex head.

  4. #4
    Join Date
    Jan 2020
    Location
    Sydney, NSW
    Posts
    3
    Users Country Flag Thread Starter

    Awesome, Thanks guys.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |