Glad you are enjoying it.
The turbo back systems do give a performance boost over the cat-back systems.
How much did it set you back?
Hope we can hear the thing at lakeside happy laps in December?
Thought I'd post up a few pics of my Milltek exhaust.
It's the full system from the turbo back.
Fit was pretty typical of a 'bolt-on', needed a few tweaks here and there. Think I might pull the muffler down and out a little more when I get the time.
Sounds pretty good, should burn itself in in the next week or so and have a nice note.
There's also a substantial increase in performance and not just a placebo effect from the louder noise.
The biggest thing I've noticed is the sound of the turbo spooling!
![]()
Last edited by s4mmie; 04-09-2012 at 03:28 PM.
Glad you are enjoying it.
The turbo back systems do give a performance boost over the cat-back systems.
How much did it set you back?
Hope we can hear the thing at lakeside happy laps in December?
Yeah it's pretty obvious looking at the stock dump pipe that that's where the restriction is. The rest of the stock exhaust system looks pretty good. Landed at my door it was $1600. Couldn't recommend the service at Rennenhaus more
Haven't heard about Lakeside in Dec, is there a VW thing or general public?
$1600 isn't bad for the full system.
My bits and bobs ended up around that price as well.
See here for lakeside info:
http://www.vwwatercooled.org.au/foru...430-64148.html
At the moment it is just a VW family thing that i am trying to organise however if we can't fill all the spaces then we can open it up to all brands.
Sounds like fun
After chasing some elusive vibrations and moving the muffler down, I discovered what I thought was the exhaust hitting the bumper was actually coming from some little vents in the spare wheel well. If you look in the spare wheel well back towards the rear of the car there's two vents with little flaps on them. The flaps were.. flappingSounded like a vibration when your driving. I've removed the flaps and all is well (easy enough to put back in if I have to). Does anyone know what purpose these serve?
They are over pressure vents for when you close the doors on the car. They are like one way valves, so that when you close the door, the air vents out though these, but they don't allow exhaust gasses back into the car.
![]()
"If can't get behind your troops, feel free to stand in front of them..."
Hmmm.. I thought it might be keeping the exhaust gasses out. Seems odd that they'd be flapping around from the exhaust though, unless it was creating some kind of pulsating vacuum :/ See how I go.. if I get smoked out I might have to figure something outI'm finally loving my exhaust with no rattles/vibrations!
Last edited by s4mmie; 23-10-2011 at 01:44 PM.
Is the muffler the same fitment as stock one, I like the look of the standard twin pipes.
They're pretty much identical, just bigger and betterI love the dual tips
I've dropped the muffler down a bit now so it sits in the same position as the stocker.
I also just lowered mine a little. Have you found you cant help but drop down a gear and smash it through every tunnel you go through now? Haha.
MY2008 VW Polo GTi / GIAC Tune / Forge FMIC / Forge 007 DV / N75 Race / BMC OTA / KW V1 Coilovers / Whiteline Front&Rear Swaybars + Toe-In Shim / Weichers Front&Rear Strut Braces / Full Non-Res Milltek Exhaust / 17" Bora Sport
Bookmarks