Louis19's Build Thread

**louis19** · 31-05-2016, 09:57 AM

Originally Posted by seangti

I know of a good way to overcome this.

I've been impressed with the traction you're getting in your videos. 2nd gear was still a lesson in patience - which I hadn't mastered.

LOL! Your a big tease

Thanks mate, I've also got some "not so good" patience videos that I'm sure are not so impressive!

**louis19** · 05-06-2016, 06:13 PM

Just some more car vid spamming for my thread. Another fun morning at QR. First half the session was quite damp, but the numbers were low today so I got to give the car a good push around a few corners when the pack thinned out a couple times.

https://youtu.be/YnQbb002Bx0

NOTE: In the vid, my car always seems to sound like my gearbox crunches... It's not. Gearbox is butter smoother actually. Its the exhaust that makes a "cracking" noise when I change gear. A lot refer to it sounding like DSG cars do on gearchange.

**grandturismo** · 05-06-2016, 08:30 PM

Now that you're progressing to corners...You really need to unleash the Ricardo within at a track day soon buddy.

**louis19** · 06-06-2016, 05:36 PM

Originally Posted by grandturismo

Now that you're progressing to corners...You really need to unleash the Ricardo within at a track day soon buddy.

Currently in the process of organising that

**Blue9N3** · 06-06-2016, 08:32 PM

That xr5 was quick!

Sent from my iPhone using Tapatalk

**louis19** · 07-06-2016, 07:02 AM

Originally Posted by Blue9N3

That xr5 was quick!

Sent from my iPhone using Tapatalk

It is indeed. He's a mate of mine, he's also had a turbo swap. Was a very even race for the polo

**louis19** · 16-06-2016, 06:53 PM

James was selling his cup edition spoiler last week so I jumped on that quickly after Sean messaged me saying it was for sale (Thanks for the heads up mate!!)

Its the same spoiler that Gav has, (genuine rip off lol) so the corners don't sit perfectly, but I put a thin bead of sikaflex in there to fill the little gaps. Have to clean off the last tiny little bits of silicone but will do that tomorrow once its dried. Yet to see it out in the sun but pretty pleased with how the paint turned out, nice and glossy.

**louis19** · 02-07-2016, 11:00 PM

Today was my first timed session in the polo. Had a blast and learnt a lot. Thanks to Sean and Nat for all the help throughout the day. Unfortunately I forgot to turn my GoPro on in the later sessions which were my better ones but here's one from an earlier session.

Looking forward to giving it another crack when the next event comes up. Until then there's plenty I can look back at and try and improve on.

I wasn't following my lap times until we finished off and then I went and checked all of them. My best time was a 62.9sec lap, which I'm pretty happy with for a first go. My consistently also became a lot better towards the end of the day.

https://www.youtube.com/watch?v=Pljo...ature=youtu.be

**louis19** · 05-09-2016, 04:00 PM

So my H&R coilovers arrived last week so Thursday night I tacked the rears and the rest was done on the weekend. I had a couple issues with my MCA set that only seemed to be evident in my set, but none of the others had the same problem. Anyhow, I'm now rolling around on the same Monotube ones that Sean runs in the devil. Install was a breeze, everything fitted really nicely. They're a nice bit of gear and they ride very nicely, firm but comfortable. The car went in for an alignment today also.

I'm going to QR Street sprints in 2 weeks time (17th) so they will be put to the test then. Can't wait to see how they perform and to be back out to do another timed session, hopefully there's an improvement

Sent from my iPhone using Tapatalk