Little Red Devil

[Greg Roles]

You're welcome. A Polo sized can! For your next secret weapon we discussed this arvo....

I have these in 1/4 ( 6.35 ) 5/16 ( 7.94 ) 3/8 ( 9.52 ) 3/4 ( 19 ) 1" ( 25.4 ) 1.5" ( 38/1 ) and a spare length of 1.8mm wall 3" stainless pipe, but only a 3" mild steel 90 bend. Fine if you ceramic the whole thing though, but perhaps get a good stainless 90 off e-bay. Look for the thicker ones though, act as a heat sink when thicker.

[vwthunder]

I have the model below that one (stealth), didnt you have one the same Ant and you sold it ?

I went to all the trouble of having -AN bungs welded onto it. Noticed you can get it in NPT now

[firdausasri]

Greg from Carformance dropped off the shortened can this afternoon. Great job, thanks mate

Similar to my Provent 200

[VWindahouse]

You're welcome. A Polo sized can! For your next secret weapon we discussed this arvo....

Gold, appreciate the help mate!

I have the model below that one (stealth), didnt you have one the same Ant and you sold it ?

I went to all the trouble of having -AN bungs welded onto it. Noticed you can get it in NPT now

I originally had another brand mate but it didn't catch much so figured this was a better design.

Similar to my Provent 200

Great minds and all that

Getting closer

Hotside is now thoroughly thermal coated





They say it's good for up to around 1200C (2400F) but I'm hoping not to test that any time soon.

And got one of these Moroso Venturi valves to be welded into the exhaust to run off the catch can so I can delete the PCV. Thanks again Greg!



Still got the custom made TIP to sort out then it's tune time after Gav pop's in the wee turbo.

[Lito]

Loving the progress mate, can't wait to see it all back together!

[h100vw]

[VWindahouse]

Bloody beautiful Gav as usual

Thanks Carlos, so close now mate!!

[Jmac]

Is this plumbing back to sump.? If not I'm keen to see how much it actually catches. I'm basing this on the fact that oil will lie on the lowest part of the inter cooler piping , for anyone who has taken the lowest pipe off will know if u managed not to get it on your clothes lol. Keen to hear as its a consideration I have when I get started back on my rocket

[Lito]

Is this plumbing back to sump.? If not I'm keen to see how much it actually catches. I'm basing this on the fact that oil will lie on the lowest part of the inter cooler piping , for anyone who has taken the lowest pipe off will know if u managed not to get it on your clothes lol. Keen to hear as its a consideration I have when I get started back on my rocket

By the looks of it I think it vents to the exhaust? Maybe pre-cat?

[Jmac]

Sorry mate u got me there, I'm missing where your going there. Did u get that crank angle torqued btw?
Cheers
Jmac