Little Red Devil

[vwthunder]

Ok so after some research I found this for those who want to have the added safety of a 4 point harness but want to keep both their original front and rear seats and don't want a roll cage either. And best of all the Polo is listed

SCHROTH RACING > Professional Racing Harnesses

http://www.schrothracing.com/docs/VW...structions.pdf

Was thinking about getting one of those ages ago, but never got around to it

You can get them at tunershop

Tunershop - Schroth Belts - QuickFit asm - tuning - german wheels and tires - spacers - coilovers

[rgvlee]

Interesting bit of kit

[VWindahouse]

Thanks mate! Good prices there. But with the cage I think I will get these which of course aren't listed

SCHROTH RACING > Professional Racing Harnesses

[Eddy]

Hoyhoy.

Ant, me had one on order quite some time ago & then after a couple of weeks waiting was told that it won't fit the Pog, so make sure it fits.
Thats when I found the CG-Lock.

[VWindahouse]

Weird, it lists the Polo 9n on the install PDF. I wouldn't have thought there was much of a difference between the 9n and 9n3 but maybe there is.

[Eddy]

Hoyhoy.

Like I say it was a while ago.

[9n3 Turbo]

Hey Anthony had a look at all the pics and read some of the 72 pages and this has come on a long way from its stock form and you've done some great mods.

Looking forward to seeing more about the new turbo.

Also good luck Saturday with the top mounts and feedback ASAP.

[Jmac]

Thanks mate

Got my third brake light from a wrecked TDI in Israel. Go Ebay!



Might have a go at removing the GTI spoiler today if I have time. Man I hope this goes to plan. Can't find anyone that's done this on the net so flying blind as far as the TDI light fitting into the hatch recess once the spoiler is removed

All the 9N3 gates are the same so light fits minus spoiler so good call. Car looking more level now which is nice. Im sure you must had some moments the more you lower the weight geez i cant wait to get out there with the wee silver rocket too. i got one bracket and the engine will be where i want it , then its on. Did you ever hear if the 034 manifold got completed?? i now got my Bam manifold and will cut it and join to the AGU or i have plan b which is mega cool. Anyway keep up the good work
Jmac

[9n3 Turbo]

The manifolds not been released yet. I keep checking back at the below link as this is of interest to me

http://forums.vwvortex.com/showthread.php?5725606-***-034Motorsport-Transverse-1.8T-Intake-Manifold-Teaser!-***/page6

[Jmac]

The manifolds not been released yet. I keep checking back at the below link as this is of interest to me

VWVortex.com - *** 034Motorsport - Transverse 1.8T Intake Manifold Teaser! ***

Hey mate dont want to breach on this thread, but ive been following the 034 for a long time and they were going to mail me and now makes sense. Mate im gonna pm you .
Cheers
Jmac