Support VWWC

Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 38

Thread: Larry's 9N3 Polo GTI (Warning Large Pics)

  1. #11
    Join Date
    Nov 2010
    Location
    Pretoria, South Africa
    Posts
    57
    Users Country Flag Thread Starter

    Hey bud, Thanks for the nice comments.
    Nope never used octane booster.
    it was probibly around 28 29 deg on the day. Other PGTI results were as follows:

    Stage 1 REVO with some NF Ultra octane booster - 178hp and 285nm
    Stage 2 REVO with Down Pipe, full exhaust and intake - 186hp 296nm
    Stage 2 Unitronic with down pipe, full exhaust, intake, Seat Sport Front Mount Cooler - 195hp 343nm

    and I'm pretty sure they were all running octane boosters. I'm happy with my result though as it seems this dyno was a bit stingey.

    My previous dyno on Stage 1 Revo with the DP and pd160 was 180hp and 286nm, but that was at night with cooler outside temps.
    I'll have a look at the peak boost when I get a chance, I'll also be doing the wheel arch liner mod this weekend if all goes according to plan....

  2. #12
    Join Date
    Jul 2007
    Location
    Auckland, NZ
    Posts
    595
    Larry - figures are pretty reasonable. Especially at that temperature I think.

    Don't bother with arch liner - I have seen a few articles / reviews and it actually doesn't increase the airflow through the side mounted intercooler. I bought everything and didn't end up fitting it. I even painted the vents...

    Also with REVO - check what settings you have on. There is 'timing' / 'boost' / 'fuel'. Fuel is usually set at 9, and it will adapt itself. I think my boost is 7 or 8 (higher the number, higher the boost) / timing is at 7.

    It has been road tuned with REVO dealer here. Needs to do another one as I also have Forge TIP.

    Seat front mount cooler sounds neat, for me I am saving for possible next car. No more upgrades...

    I will be really disappointed with REVO 2 tune if next dyno result figure isn't great - because I had 15% fuel consumption hit with REVO 2.
    06 Polo GTI - REVO Stage 2 = 140kw @ wheels.
    06 Golf GTI - Bluefin Stage 1 blacked out with ED30 theme, leather, xenon, etc.

  3. #13
    Join Date
    Nov 2010
    Location
    Pretoria, South Africa
    Posts
    57
    Users Country Flag Thread Starter
    Oh for sure dude, fuel consumption went up QUITE alot. My settings where B7 T3 F5....The fueling is locked on 5, and my car already pulls a bit of timing on T3.....so Maybe Octane booster is needed.

    Must admit I was hoping for close to 200hp....but anyway......

  4. #14
    Join Date
    Mar 2008
    Location
    Brisbane
    Posts
    1,114
    How do the A-Drives handle that power? I would've thought S-Drives minimum?

  5. #15
    Join Date
    Dec 2010
    Location
    jhb, south africa
    Posts
    57
    Users Country Flag
    The Revo 1 polo is me, with the octane booster I ran, I should have been on 102 octane almost and set on B7 T5 with 0 timing pull but we are at 1600m above sea level which is to our downfall

  6. #16
    Join Date
    Nov 2010
    Location
    Pretoria, South Africa
    Posts
    57
    Users Country Flag Thread Starter
    A drives arent bad, but I might give the s drives a go when these are done.....

    Helloo Mr doood !

  7. #17
    Join Date
    Dec 2010
    Location
    jhb, south africa
    Posts
    57
    Users Country Flag
    .

  8. #18
    Join Date
    Dec 2010
    Location
    South Africa
    Posts
    163
    Users Country Flag
    Larry, great to see you posting here mate.
    Matteo
    2005 Polo 1.9TDi Sportline - Sooty
    2012 ....... - M2 Rally Sport

  9. #19
    Join Date
    Nov 2010
    Location
    Pretoria, South Africa
    Posts
    57
    Users Country Flag Thread Starter
    Quote Originally Posted by MeTsU View Post
    Larry, great to see you posting here mate.
    Thanks buddy....

  10. #20
    Join Date
    Sep 2006
    Location
    Melbourne
    Posts
    2,344

    Quote Originally Posted by MeTsU View Post
    Larry, great to see you posting here mate.
    Yes I agree too, thanks for crossing over to our side, now I will be going over to your forums soon

Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |