Installing front sway bar, what's in the package?

[insanekiwi]

Hi I am just trying to figure out what comes with front sway bar package.

I have I think 4 lock nuts and just the sway bar itself.

A lot less things compared to the rear sway bar, as I am guessing it's just replacing the front that's already there.

Am I missing any parts?

Thanks, it's Whiteline product.

Cheers,
Han

[insanekiwi]

I know there are a few people who also has fronts...

any ideas?

[Timbo]

I think you'll find it needs to be done by a suspension shop, unless you have the gear to remove the sub-frame

[insanekiwi]

Thanks Timbo, yes I am aware.

Just wondering if I am missing any parts prior to taking it to the workshop to get it fitted. I have the swaybar, and 4 lock nuts, and that's it.

I don't want them all that labour costs, and realise that some parts are missing.... :0(

Any ideas? since it's a direct replacement, it shouldn't need any extra parts right?

[insanekiwi]

Does anybody have instructions on this? Whiteline doesn't have installation guide for this.

I heard this is just a replacement part from original.. meaning only need the bar, and nothing else?

Has 2 holes on each end, which hole to be used? Mine is BWR18Z i think.

Which one is hard, and which one is soft??

Any help would be highly appreciated.

Thanks

[MACCAA]

Hole nearest each end of the bar is the softest setting.Any holes after that make the bar shorter ie stiffer.
Cheers
Len

[insanekiwi]

Thanks MACCAA,

This is just a replacement so I shouldn't need any other parts correct?

I have bought this as second hand, so I wasn't sure... second hand but unused..

[MACCAA]

Thanks MACCAA,

This is just a replacement so I shouldn't need any other parts correct?

I have bought this as second hand, so I wasn't sure... second hand but unused..

Don't know what's required to fit the front bar.Ring or E-mail Whiteline and ask them.
I've always found Jim at Whiteline very helpfull.
Cheers
Len

[Eddy]

Hoyhoy.
Bud, I'm fairly sure you'll will need some other bushes, drilled out for the 22mm bar. They usually come in neoprene.

[insanekiwi]

Yup found 2 x polythene (yellow looking) bushes. And Grease. Instruction sheet which is not specific to our car.

Hope that's all I need!