a few K03 turbo flange questions

[sambb]

I'm in the process of getting some bits together for an upcoming dump pipe and have a few questions:

1. I've seen some fuzzy pictures of the k03 turbo outlet that measure it at 3/1/2 inches. Can anyone confirm this?
2. Does anyone know the I.D of the stock exhaust flange and if it matches the profile of the turbo outlet housing?
3. If you have it all port matched at the turbo outlet, does the OEM gasket line up spot on or do you need to go to an aftermarket gasket?
4. anyone have any spare flanges lying around?

thanks

[Paazuzu]

4. anyone have any spare flanges lying around?

thanks

I think Gav has some flanges made up from memory.

[h100vw]

The guy that made my downpipe had a few flanges cut. Referenced off a new gasket.

I have a K03s in the cupboard and the top end of a std downpipe here. If you confirm what dimensions you want Sam I'll break out the verniers.

Gavin

[sambb]

That'd be great thanks Gav. I was after the I.D of the turbo's outlet flange and also the I.D of the standard dump pipe flange.

thanks
sam

[h100vw]

That'd be great thanks Gav. I was after the I.D of the turbo's outlet flange and also the I.D of the standard dump pipe flange.

thanks
sam

2 minutes

EDIT

Both are 3.5 inch/88-90mm give or take

Gavin

[sambb]

legend! thanks