Digital EGT Gauge

[Redliner]

Looking at putting an EGT gauge in my car.
Will probably buy an Auber Instruments:
http://www.auberins.com/index.php?ma...roducts_id=230

Could someone confirm which "Mounting Type Option" that I need to fit a Frankenturbo F23.
Thanks.

[Redliner]

Edited thread with correct link for bundled set.

[VWindahouse]

Are you tapping into the exhaust manifold collector?

[Redliner]

I have got to check with Seb.
I am sure he said that there was a bung on the output side of the turbo.
Could be wrong though.

[VWindahouse]

Could be right actually. Gav would you mind checking one of your many snails?

[gldgti]

Always better to read pre-turbo for EGT as there are a bunch of thermodynamics reasons that a post turbo reading can give you false/non-representative indications about whats going on.

Quite acceptable to drill and tap a manifold though if that's what you need to do.

Also, I just bought a boost/EGT guage set on ebay from an Australian seller.... racetech gauges, but ones with high reading recall and audio/visual warning aswell.

[h100vw]

Forgot that I keep all that "useful stuff" floating about in the garage. Wait one caller.........

No bolt holes in the turbo fellas.

Gavin

[h100vw]

The probe is in the downpipe on the S3/TT so you can use whatever you like. Have you had a new downpipe made for yours or are you using the adapter pipe?

The weld in stainless one would probably be the sensible one?

Gavin