Support VWWC

Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Dent in door

  1. #1
    Join Date
    Jul 2008
    Location
    S.E Melbourne
    Posts
    1,125
    Users Country Flag

    Dent in door

    I put a dent in my own door
    it's real minor but would like to get it out any suggestions?

    It's a shallow dimple of dent about the size of a 20 cent coin, will take photos when I get home.

  2. #2
    Join Date
    Jun 2008
    Location
    Sydney, NSW
    Posts
    364
    There is some dent remover that can fix small dent like that in 20 min and it cost about 200 bucks (depends on size and you visit them or they visit you).

    Where about are you located?

  3. #3
    Join Date
    Jul 2008
    Location
    S.E Melbourne
    Posts
    1,125
    Users Country Flag Thread Starter
    Port Melbourne for work, Endeavour Hills for home.

  4. #4
    Join Date
    Jun 2008
    Location
    Sydney, NSW
    Posts
    364
    Dunno anyone overthere to fix that..

    The one i know is base in sydney...

    Try search paintless dent removal on goggle or yahoo and see how it goes...

  5. #5
    Join Date
    Jul 2008
    Location
    S.E Melbourne
    Posts
    1,125
    Users Country Flag Thread Starter
    Thanks mate will do... might call my stealer as well I think they have a guy for this.

  6. #6
    Join Date
    Jun 2008
    Location
    Sydney
    Posts
    450
    try buying a kit "POPS A DENT" works ok. i have them. or try heating the area, and popping it back out from the inside.

  7. #7
    Join Date
    Jan 2007
    Location
    Sydney
    Posts
    153
    I'd go to one of those paintless dent removal guys.

    I have used one in Syd for a few door dings and the results were terriffic.

  8. #8
    Join Date
    Jul 2008
    Location
    S.E Melbourne
    Posts
    1,125
    Users Country Flag Thread Starter
    Sent out a few emails to some PDR guys waiting on a reply, shouldn't cost much and they can do it wile I'm at work

  9. #9
    Join Date
    Jun 2008
    Location
    Sydney, NSW
    Posts
    364
    Sure, it takes around 20 min depends on how bad your dent is, and after that he will wax and buff the area. And he will use a lot of mirrors to check his work as well and thats why it takes time! But the results usually great, and very difficult to spot the difference (provided that no paint was damaged).

  10. #10
    Join Date
    Jul 2008
    Location
    S.E Melbourne
    Posts
    1,125
    Users Country Flag Thread Starter

    it's barely noticeable now so pretty confident it will disappear.
    They are coming around to work tomorrow they do prestige cars so my polo should be in safe hands.

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |