Support VWWC

Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 34

Thread: Changing Polo GTI Front Brake Rotors...

  1. #11
    Join Date
    Feb 2008
    Location
    Sydney
    Posts
    2,756
    Users Country Flag Thread Starter

    Quote Originally Posted by Gti Dave View Post
    Just wanted to know whether you have experienced any brake squeeling with this set up? Been told by some people that EBC pads squeel when not warmed up. (Apologies about the spelling).
    Not when I had the car. Dad now has it as I am overseas, and he hasn't said anything about it.
    "If can't get behind your troops, feel free to stand in front of them..."

  2. #12
    Join Date
    Sep 2008
    Location
    Melbourne
    Posts
    1,009
    Users Country Flag
    Thanks for that mate. Just waiting for my pads to wear out before I go replacing the rotors and pads.

  3. #13
    Join Date
    Nov 2006
    Location
    Melbourne
    Posts
    196
    Good write up Blitzen
    Some more to add, while changing the discs, its best to scrub & clean up the surface of the hub where its meet the rotor for true run out.
    Also some new pads also have bedding strip on the pad so bedding in by accelerate & slow down 10 times not really necessary. Just drive normal & try to avoid holding brake pedal while stationary at traffic lights for bout 200kms. I think later range of EBC's all have this.
    Green EBC pads alone should help cure fade, definitely better bite & its perfectly fine on street duty. Best to have both axle done at once.
    As for the squeal, either spray pads with anti squeal spray or paste where pad meet caliper should help.

  4. #14
    Join Date
    May 2008
    Location
    melbourne
    Posts
    2,080
    thanks for the info blitzen. getting better brake pads/ slotted rotors (im gonna stick with stock size in the tdi which is smaller than you guys) is not such an uhm-ah decision when my front rotor(s) are warped anyway.

    im gonna check out QFM pads- my cousin loves them.

  5. #15
    Join Date
    Oct 2010
    Location
    Melbourne, VIC
    Posts
    3,178
    Users Country Flag
    Sorry for the thread resurrection and slight detour but...

    Does anyone know the part number for the bolts that hold the caliper to the hub?
    I need 4 of these for my imminent brake upgrade (after killing my current setup)
    Resident grumpy old fart
    VW - Metallic Paint, Radial Tyres, Laminated Windscreen, Electric Windows, VW Alloy Wheels, Variable Geometry Exhaust Driven Supercharger, Direct Unit Fuel Injection, Adiabatic Ignition, MacPherson Struts front, Torsion Beam rear, Coil Springs, Hydraulic Dampers, Front Anti-Roll Bar, Disc Brakes, Bosch ECU, ABS

  6. #16
    Join Date
    May 2008
    Location
    Adelaide, SA
    Posts
    739
    Cheap, Fast, Reliable. Choose two.

  7. #17
    Join Date
    Oct 2010
    Location
    Melbourne, VIC
    Posts
    3,178
    Users Country Flag
    Much obliged
    Resident grumpy old fart
    VW - Metallic Paint, Radial Tyres, Laminated Windscreen, Electric Windows, VW Alloy Wheels, Variable Geometry Exhaust Driven Supercharger, Direct Unit Fuel Injection, Adiabatic Ignition, MacPherson Struts front, Torsion Beam rear, Coil Springs, Hydraulic Dampers, Front Anti-Roll Bar, Disc Brakes, Bosch ECU, ABS

  8. #18
    Join Date
    Jan 2013
    Location
    Gold Coast Qld
    Posts
    22
    Users Country Flag
    Hi Blitzen

    you wouldn't by any chance have a part number for these discs from RDA , and possibly the rear discs, I'm looking to do all 4 and I'm currently confused as to which ones to get , also the Part numbers for the green pads

    any help would be much appreciated

    regards
    Watto

  9. #19
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,979
    Users Country Flag
    Watto, speak to GSL Rallysport in Brisbane for brakes. They'll be able to sort you out. The discs are the same as the MK4 Golf GTI if that helps you googling. The pads are different to the Golf though, so you need proper Polo 9N for them.

    Gavin

  10. #20
    Join Date
    Jan 2013
    Location
    Gold Coast Qld
    Posts
    22
    Users Country Flag

    Quote Originally Posted by h100vw View Post
    Watto, speak to GSL Rallysport in Brisbane for brakes. They'll be able to sort you out. The discs are the same as the MK4 Golf GTI if that helps you googling. The pads are different to the Golf though, so you need proper Polo 9N for them.

    Gavin
    Thanks Gavin .... onto it

Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |