cam shafts

[mikepologti]

has anyone on here upgarded there cam shafts? was just curious. some of them from this site http://www.intengineering.com/Cat-Ca.../sc262362-1-2/ have some interesting options. some of them produce more power at top end which could be usfull, while im guess at a sacrafice to low end torque, which could help with wheel spin. any thaughts? oh and incase people are wondering i know ther for mark 4 golfs but id asume the 1.8t cam shafts would be similar/same.

[VWindahouse]

Hey mate, Plautos has a set of those on his little weapon.

[mikepologti]

Hey mate, Plautos has a set of those on his little weapon.

awsome thanks ill im him.

[AcoustiK]

Well according to the website it says if you plan to get a bigger turbo then its useful.... I assume with the current cams its tuned for the K03 as much as it can?

[firdausasri]

I think we can source Shrick cams but not too sure if it's billet or grinned cams...

[VWindahouse]

Anyone else up for another glorious group buy

[Plautos]

I'm using the 3651.

The engine revs faster and develops more power at hi-rpm.

Check out my Polo's thread, there you will find dyno charts, after and before the cams.

[Jmac]

Be good to see some figures after these cams are done as im sure our good friend plautos knows if you go too agressive on cams you can bleed off compression, and lets face it compression is the key. This of course can be dealt with buy changing the structure of the piston or decking the block.
Functionality is another thing.
Interesting thread to be started here guys good work
Jmac

[VWindahouse]

Be good to see some figures after these cams are done as im sure our good friend plautos knows if you go too agressive on cams you can bleed off compression, and lets face it compression is the key. This of course can be dealt with buy changing the structure of the piston or decking the block.
Functionality is another thing.
Interesting thread to be started here guys good work
Jmac

Yeah Jimmy, great points! I just looked at Mikes link and it says there are 3 different hydraulic grinds, 2 very aggressive by the sounds of things and the other one more mild and street friendly which are the same as Plautos 3651's

By my calculations about $780-800 delivered to OZ.

[Jmac]

Yeah Jimmy, great points! I just looked at Mikes link and it says there are 3 different hydraulic grinds, 2 very aggressive by the sounds of things and the other one more mild and street friendly which are the same as Plautos 3651's

By my calculations about $780-800 delivered to OZ.

Need to know the lift , havent looked at our friend Plautos thread lately but does he have any feedback on the functionality ( if he has done it of course) and how it goes?????? im keen to find out as i have a really good connection with a top drag builder and he eats and sleeps cams, ive already mentioned the 1.8T to him so yeah m keen to hear.
Cheers
Jmac