After the Flash Tune - Add a Dump pipe

[Timbo]

Sorry it's a crappy pic. The standard dump is 2.25"; with the bends, it is less than that, of course.

[Kai]

Sorry to bring back an old thread.

But.

Im going to go do this tomorrow. Is there any chance you have anymore pictures of it?

[mitch_gti]

Thread miner

Im very tempted to get the downpipe replacement too

[Timbo]

Kai, sorry mate...I'll need to get it up on a hoist and I won't get a chance today. There's nothing too complex in the job for a good 'zorst shop. They simply cut and reuse the ball joint at the turbo, a mid flex joint as per the stock pipe, and cut into the cat so that the 3" pipe welds in smoothly. Oh, and retain the sensors. Tim

[Buller_Scott]

hi guys,

im sorry if im bringing to life an old thread again, but im interested to know- seeing as im not made of money, and $300 on a DP sounds like a very good-value-for-money mod, does anyone know if the same can be done to the exhaust system on a polo tdi- just the dp?

im a proponent of the good ole "take care of the pennies and the pounds will take care of themselves", and this sounds like something i'd be interested in....

any replies would be great. cheers.

[Timbo]

don't know about the Polo, but the guys who did mine said they do quite a few Citroen diesels, with good results

[GT3]

any replies would be great

If you're in Melbourne, the best place to do it is "The Muffler Man" at Prahran, ask for Trev (03 9522 2803) - he did mine.

[Flaps]

2.5' or 3'?

Please tell me your opinions

[thestu]

the polos have perfect exhausts. they lost power with an different exhaust on them. do other stuff before you start messing with the exhaust

[GT3]

2.5' or 3'? Please tell me your opinions

Is that your way of inciting warfare between me and Timbo?