Advise needed

[JCM308]

Hi All,

I need some advise. Last night I disconnected my battery to do some wiring work on my Polo (will post pics up for this later). Once I reconnected my battery everything is working fine apart from the auto up/down for my windows. If you hold the button the windows work but not the auto function. Is this a possible blown fuse or something that would need to be reprogrammed with vag-com? If it's a vag-com thing is there anyone in Sydney that can look at it for me (don't really want to go back to the dealer).

[kelvniii]

To reset the power windows by lowering the driver’s side window all the way down and holding the switch for about 10 seconds and see if that works

[JCM308]

Thanks for that. I'll give it a go later on and see if that works.

[JCM308]

That did the trick. Thanks for that.

[mikepologti]

awsome , sooner or later ill replace the stock battery, ill keep that as a mental note i think.

[kelvniii]

not at all~

[polo_spec_d]

There is also a reference in the manual about fixing the window's aswell. Not sure what page tho.

[Joe Chu]

Hi All,

I need some advise. Last night I disconnected my battery to do some wiring work on my Polo (will post pics up for this later). Once I reconnected my battery everything is working fine apart from the auto up/down for my windows. If you hold the button the windows work but not the auto function. Is this a possible blown fuse or something that would need to be reprogrammed with vag-com? If it's a vag-com thing is there anyone in Sydney that can look at it for me (don't really want to go back to the dealer).

Hold window switch down until bottoms and hold for 5 secs then all the way up and hold for 5 secs, do the same for pasengers side. There will also be codes logged for voltage lost in several ECU's but you won't notice anything.