Wtb: 98 GTI front hub carriers.

[Jmr84]

Hey ppl, chasing a set of front hub carriers for a 6N 98 GTI polo. Can get them x Germany but don't want to wait that long nor pay for brand new genuine carriers. Anyone got any lying around in Australia or know of somewhere I can get them aftermarket? Cheers.

[nightphotographer]

Correct me if I'm wrong but I don't think the 6N GTI made it very far out of Germany - i.e. their definitely weren't any in Aus, and I can't remember ever seeing one in the UK. I had to google image it to see if it ever existed at all. The 6N2 on the other hand - these are all over the place in europe, you could easily find the part your after and if the seller's quick enough, you'll have it here within a week. My advice is look here - breaking polo gti | eBay

I promise you, you won't find any of these in Australia without ordering through your dealership for $$$.

[Jmr84]

Ok cheers, thought as much but had to give it a shot.
Doing a 20v 1.8 conversion and having issues with hub carriers and drive shafts lining up. Motor not in position yet as can't seem to get right angle for shafts and I don't think I can get motor further back without getting rough with the firewall.

[Stanton]

Use mk3 GL Golf ones,VR6 caliper carrier and Toledo 16v discs for 280 mm brakes.Piece of cake.Fit the 100mm inner to the Polo d/s.
Not much room in a 6n engine bay.Good luck.

[Jmr84]

Righto thanks for that ill look into it. Cheers.