Mk6 LED Taillights

[AdamD]

Thanks Stu! I'll update the coding post.

[VeeDub23]

Thanks Ozram! Appreciate it!

[Andysommer7]

Just got my tails delivered from carsystems.pl as recommended my Ozram! (Cheers buddy) Only cost $700 inc. shipping and they are perfect quality, fantasticlu packaged and it only took 1 week to get here

[Brycem]

Heaps of people in the US seem to run them. From photo's they look identical to OEM to me.

Been corresponding with the VACAR sales manager. He assures me that he can supply LED taillights for a right hand drive vehicle with a foglight on the driver side and reverse light on the passenger side and deliver these to Australia for $366.50 US including adaptors. Seems too good to be true.

I asked him how they compared quality wise with the OEM taillights and he indicated that they were close but not quite as good. When asked what apsects were poorer he indicated the mouldings.

I am very tempted but something is holding me back. I assume these would be subject to the same coding issues.

Has anyone in Australia ever purchased and fitted the VACAR lights?

Thanks

[sVWatt]

Been corresponding with the VACAR sales manager. He assures me that he can supply LED taillights for a right hand drive vehicle with a foglight on the driver side and reverse light on the passenger side and deliver these to Australia for $366.50 US including adaptors. Seems too good to be true.

I asked him how they compared quality wise with the OEM taillights and he indicated that they were close but not quite as good. When asked what apsects were poorer he indicated the mouldings.

I am very tempted but something is holding me back. I assume these would be subject to the same coding issues.

Has anyone in Australia ever purchased and fitted the VACAR lights?

Thanks

Got mine deliverd for $365 with adapters. Lense quality seems good. Fit is fine. Interior, unseen plastic seems more brittle, but not enough to be a concern. Overall I'm impressed with mine.

[Brycem]

And did they need coded and if so was it the same procedure that I have read earlier in this thread?

Ps thanks for the mini review. Do you think the brittleness of the plastic could cause issues down the track?

[sVWatt]

And did they need coded and if so was it the same procedure that I have read earlier in this thread?

Ps thanks for the mini review. Do you think the brittleness of the plastic could cause issues down the track?

No coding. The outer lense area - the indicators, tails etc is a nice feel, soft resin type. I think it will be tuff but flexible. The inner black shell is definitely harder, but once screwed in I don't think it's going to matter.

[wogboy_9000]

No coding. The outer lense area - the indicators, tails etc is a nice feel, soft resin type. I think it will be tuff but flexible. The inner black shell is definitely harder, but once screwed in I don't think it's going to matter.

Wow, so just to confirm, no coding at all and they work 100% correctly?

[ptR]

very nice!! thanks for the links

[sVWatt]

Wow, so just to confirm, no coding at all and they work 100% correctly?

Okay, so 'wow' might be a tad over optimistic like me...the supplier said no coding, but I see now a bulb warning light up on the dash. It doesn't affect the actual operation of the side lights or brake lights, but I will need to get it coded out. Otherwise they are good for $360 odd.