Mk6 LED Taillights

[AdamD]

Having installed the lights without a hitch, I have run in to an issue with coding.

Please see below for what comes up when I jump in to Byte 18. I don't appear to be able to amend the Binary.

You have a dropdown box there, with the binary values at far left. The option displayed in your screenshot is 00. Click the dropdown and select the relevant option - note that they're not all in order from memory.

Previous versions of the VCDS app used to allow you to type the bit value; now they've replaced it with a dropdown for simplicity.

[Sawbin]

Hey guys,

Placed my order for the lights with Ozrams contact today. Looking forward to getting them in a few weeks. Will post pics after install.
Thanks again to Ozram for his assistance.

[andrew7]

Placed my order a week ago with Ozrams contact, and confirmation of shipping followed within 48 hours. Typical german efficiency

[5317707]

Placed my order a week ago with Ozrams contact, and confirmation of shipping followed within 48 hours. Typical german efficiency

very true! when i placed my order through ozrams contact, he sent it out on the same day

[mr fox]

Anyone interested in a set of R tail lights????
Still in boxes????
I put them on the car, we couldn't code them so i took them off...So brand new.I never put them back on again..
Now sitting in the garage and i've lost interest...
PM me, purchased from Ozrams contact.

[jameshero]

pm sent

EDIT : Didn't end up buying so I assume they're still available.

[Hhawker]

So having installed and coded my new tail lights to 04 I can confirm that I am suffering the DRL problem (as per post number #268 in this thread).

So my car is running Central Electrics Revision 0615, which means I need to amend the coding 15.

My issue is that I don't have option 15 in the drop down box when coding, and I don't appear to be be able to manually change the binary to 00010101.

Can anyone advise how I go about making the change as per the above?

Please see below for an image of what I am seeing in Byte 18.

Thanks fellas.

[Ozram]

Can you click in the 18th box across on line 3 (the numbering goes 0,1,2,3...) and get a flashing cursor there?

Just backspace the ''04' that is in the box & type '15'

Been a while since I did one so getting a bit rusty

[Hhawker]

Thanks for your reply Ozram.

Unfortunately I'm not able to just change the figure in the 3rd line, that's one of the first things I tried....

[AdamD]

My issue is that I don't have option 15 in the drop down box when coding, and I don't appear to be be able to manually change the binary to 00010101.

Can anyone advise how I go about making the change as per the above?

You should be able to scroll with the keyboard, and possibly also if you mouseover the last item in the list. I noticed this last time I used it... not very intuitive. 15 is right toward the bottom.