Mk6 LED Taillights

[Panthera]

Hi all,


Just emailed Ozram's contact, hopefully I'll get a reply soon.

Thanks to Ozram for the contact details.

Also looking for someone to help me code once I get my lights around Melbourne area, offering two off 6 packs beer of your choice (be reasonable =) )

PM me for details!

[slipshot]

Hi all,


Just emailed Ozram's contact, hopefully I'll get a reply soon.

Thanks to Ozram for the contact details.

Also looking for someone to help me code once I get my lights around Melbourne area, offering two off 6 packs beer of your choice (be reasonable =) )

PM me for details!

Ditto this - also in Melbourne, soon to order lights and would appreciate anyone who is able to support with coding... Thanks

[aVex]

Two tail light orders in Melbourne? I wonder how much are the lights and the delivery cost. Maybe a group buy and sharing the delivery cost will help bring down the price?

[AdamD]

looking for someone to help me code once I get my lights around Melbourne area, offering two off 6 packs beer of your choice (be reasonable =) )

PM me for details!

Ditto this - also in Melbourne, soon to order lights and would appreciate anyone who is able to support with coding... Thanks

Guys, see this thread for details of members in your area with VCDS who can help you. Plenty of helpful people there!

[MiiLos]

i will also be ordering a set of the R tail lights in the near future, count me in for a melbourne group buy if it means some savings

[kash_0]

I'm keen if we sort out a group buy.

[GTI_Adidas]

Moderator Edit by Corey_R:
Threads merged. See AdamD's post for start of more useful information about fitting LED tailights to existing cars.

Over on the UK GTI forum they are flipping out because VW has apparently already upgraded the MY10 GTI with LED rear lights and keyless entry.

Apparently the LED's look like this (on GTI R here):

Volkswagen Golf - Picture Gallery - Autocar.co.uk

Does anyone know whether the LED tail lights are on the GTI's spotted in Aus?

If not, this could mean that the first shipment will be "out-of-date" even before delivery. Unless VW dumps the old tail lights on Oz, you would think that once we start getting the GTI then supply of GTI's with the LED's should not be too far behind UK.

My dealer says that they think there is at least one ship load of GTI's in the country already. I know nothing about how VW runs its production lines for UK and Aus. Apperently the Aus cars are built in Germany. Assuming they build the RHD cars on the same production line, then this probably means the first shipment would not have the LEDs.

I have got my fingers crossed (a) that they release the GTI soon; (b) that I don't have to wait too long after the release for a car (sold my old car and the novelty of riding my bike to work in the rain is wearing thin); and (c) that it comes with the full MY10 spec including LED tail lights.

Dude, thats just a golf R, and my adidas GTI comes standard with these rear lights

[Corey_R]

If you're going to go around commenting on old threads, can you at least take the time to look at the actual topic, and the date that a question was asked?

When that post occured (1st Oct 2009):
1) There was no such thing as an Adidas.
2) The Golf R was still regularly referred to as the R20 or GTI R as Volkswagen hadn't officially announced it as the "Golf R"
3) And still today, it's NOT standard in Australia on the regular GTI...

[Omee]

Hey guys ... help needed. Tried to code the tails tonight but we couldn't get it to work. My central revision number is 573. We changed byte 15 to 00010101 but still have all the fault codes. I couldn't find byte number 43. My car is a early 2010 build with bi Xenons. Big thanks to Brandon for helping me out, any help would be much appreciated . Thanks Omee

[v0a]

In all cases, the byte to code is byte 18 of the Central Electrics module. Access it in VCDS via 09-Cent Electrics -> Coding 07 -> Long Coding Helper -> Byte 18.

Read the above quote Omee that should help you out

count from - left to right (you'll have around 25-30 boxes with numbers in it)

box 1 = byte 0
box 2 = byte 1

you want byte 18 (so count 19 boxes)

and then just change it to 15, (dont need to use binary as it will auto update into binary from hex)