Support VWWC

Results 1 to 2 of 2

Thread: Austins on a MK6 Cabriolet

  1. #1
    Join Date
    Dec 2006
    Location
    Kilsyth, VIC
    Posts
    6,304
    Users Country Flag

    Austins on a MK6 Cabriolet

    A terrible terrible photo until she gets a bath and some centre caps, but I put on a set of Austin wheels today along with a fresh set of RE003's. The extra 5mm of offset pushes the track out slightly and fills the guards much better the stock Seattle rims.
    These wheels have a different size centre cap so I couldn't just swap that over and will need to hunt up a new set (preferably not at the $41 odd that VW quoted (each)).



    Interestingly the bolt holes are also a little narrower so the stock Mk6 locking bolt doesn't fit in so I took the opportunity to put in some shiny chrome ones instead from Mr Lug Nut.



    If anyone can point me at some centre caps it would be appreciated. ECS have them for ~$12 each but shipping is the usual act of ridiculous (and with the AUD being where it is... well yeah... it makes VW pricing look not too bad )




    https://www.ecstuning.com/Search/Sit...315/ES2719315/
    Last edited by The_Hawk; 29-09-2015 at 05:27 PM.


    If it has an engine or heartbeat it's going to cost you. | Refer a Friend - AussieBroadband $50 Credit

  2. #2
    Join Date
    Jul 2007
    Location
    Brissy
    Posts
    2,205
    Users Country Flag

    EBay maybe your friend here.
    Did your wheels not come with bolts? Often longer or different seat bolts are required.
    MK4 GTI - Sold
    MK5 Jetta Turbo - Sold
    MK5 Jetta 2.Slow - Until it dies.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |